English dropdown-ico

Manual Sigma EF-530

12 pages 0.32 mb
Download

Go to site of 12

Summary
  • Sigma EF-530 - page 1

    14 ENGLISH Thank you very much for purchasing the Sigm a EF-530 DG SUPER EO-TTL II Electronic Flash. This product is specifically developed for the Canon E OS series SLR cameras. Depending on the camera model, functions and operation may vary . Please read this instruction booklet carefully . T o add to your enjoyment of photography , the flash has ...

  • Sigma EF-530 - page 2

    15 DESCRIPTION OF THE P ARTS EXTERNAL P ARTS 1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down 5.Bounce Angle; Right and Left 6.B ounce Lock and Release Button; Up and Down 7.Swivel Lock and Release Button; Right and Left 8.LCD Panel 9.Battery Cover 10.Shoe Ring 1 1.Shoe CONTROLS 12.MODE Button 13.<S EL> SELE ...

  • Sigma EF-530 - page 3

    16 If it still blinks after this procedure, check the battery power. ADJUSTING THE FLASH HEAD Depress the Bounce “Up and Down” Lock and Releas e Button and adjust the flash head to the desired positio n. ◆ If appears on the LCD panel when you turn on the flash, and if t his mark blinks, then the flash head is adjusted to an incor rect positio ...

  • Sigma EF-530 - page 4

    17 2. Turn on the power switch of the flash, the ETTL (TTL) mark will appear on the LCD panel and the flash will start charging. 3. Focus on your subject. 4. Check that the sub ject is located within the effective distance range indicated on the LCD panel. 5. Press the shutter button, after the flash is fully charged. Note : When the flash is fully ...

  • Sigma EF-530 - page 5

    18 5. The manual flash output display will stop blinking and remain displayed after you press the SEL button again. 6. Adjust t he focusing by pressing the shutt er button, note the subjec t distance on the focus ring on the lens. Then adjust the lens’ aperture value or flash power level until the distance indicated on the LCD panel of the flashg ...

  • Sigma EF-530 - page 6

    19 FE LOCK “FE” lock mode allows you to choose and lock the exposure before taking the picture. 1. Set the camera’s exposure mode (“P”, “T v”, “Av”, “M” or “DEP”). 2. Set the flash’s mode to the E-TTL or the High S peed S ync. 3. Focus on the subject 4. Focus on the subject in the center AF frame of the viewfinder , and ...

  • Sigma EF-530 - page 7

    20 MUL TI FLASH MODE While the shutter is open, the flash will fire repeatedly . By doing so a series of images of the subject will be exposed in one frame. A bright subject with a dark background shows more effectively in this mode. It is possible to set the firing frequency between 1Hz and 199H z. Up to 100 flashe s can be fired continuousl y . T ...

  • Sigma EF-530 - page 8

    21 Channel Setting When other people are using Wireless Flash mode near you, your flash m ay be connected with the other person’s flash and your flash may fire. In this circumstance, please set a different channel for your flash from that of the other person’s . Channel setting for Master unit 1. Press the MODE button to Select the mar k. 2. Pr ...

  • Sigma EF-530 - page 9

    22 ◆ If the flash ratio is indicated as or , press the + or - button until 1:1 is displayed. 4. Place the Slave Unit at the desire d position. 5. Make sure that the Master Un it and Slave Unit have both been charged. ◆ Master Unit’s Ready Light is lit and Slave Unit’s AF Auxiliary Light is blinking. 6. Focus on the subject and take the pict ...

  • Sigma EF-530 - page 10

    23 Wireless Flash Exposure Compensation 1. Please set master flash unit to the Wireless Flash Mode. 2. Press the SEL button to make mark blink. 3. Press the + or - button to set the flash exposure comp ensation amount. 4. Press the SEL button several times to m ake exposure compensation indicator appear. ◆ It is not necessary to make any addition ...

  • Sigma EF-530 - page 11

    24 ◆ If there are only two slave units, please se lect the indicator at step 3 ( step 9 and step 10 should be omitted). Wireless Multi Flash Set the master flash unit as follows. 1. Follow the procedure for Changing the Wireless M ode , and set to the MUL TI ／ mar k. 2. Press the SEL button to make the firing fre quency display blink. 3. Press ...

  • Sigma EF-530 - page 12

    25 Designated Slave Flash If using two or more EF-530 DG Super fla sh units, you can designate which flash will fire together by using the channel settings. In this mode, one flash unit will be used as the S lave Controller and the others for firing as Slaves. Setting the Slave Flash unit(s) for firing 1. Attach the slave unit to the camera body . ...

Manufacturer Sigma Category Camera Flash

Documents that we receive from a manufacturer of a Sigma EF-530 can be divided into several groups. They are, among others:
- Sigma technical drawings
- EF-530 manuals
- Sigma product data sheets
- information booklets
- or energy labels Sigma EF-530
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sigma EF-530.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sigma EF-530, service manual, brief instructions and user manuals Sigma EF-530. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sigma EF-530.

Similar manuals

A complete manual for the device Sigma EF-530, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sigma EF-530 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sigma EF-530.

A complete Sigma manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sigma EF-530 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sigma EF-530, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sigma EF-530, that we can find in the current document
3. Tips how to use the basic functions of the device Sigma EF-530 - which should help us in our first steps of using Sigma EF-530
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sigma EF-530
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sigma EF-530 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sigma EF-530?

Use the form below

If you did not solve your problem by using a manual Sigma EF-530, ask a question using the form below. If a user had a similar problem with Sigma EF-530 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)