Manuale per l’uso Sigma EF-530

12 pagine 0.32 mb
Scarica

Vai alla pagina of 12

Summary
  • Sigma EF-530 - page 1

    14 ENGLISH Thank you very much for purchasing the Sigm a EF-530 DG SUPER EO-TTL II Electronic Flash. This product is specifically developed for the Canon E OS series SLR cameras. Depending on the camera model, functions and operation may vary . Please read this instruction booklet carefully . T o add to your enjoyment of photography , the flash has ...

  • Sigma EF-530 - page 2

    15 DESCRIPTION OF THE P ARTS EXTERNAL P ARTS 1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down 5.Bounce Angle; Right and Left 6.B ounce Lock and Release Button; Up and Down 7.Swivel Lock and Release Button; Right and Left 8.LCD Panel 9.Battery Cover 10.Shoe Ring 1 1.Shoe CONTROLS 12.MODE Button 13.<S EL> SELE ...

  • Sigma EF-530 - page 3

    16 If it still blinks after this procedure, check the battery power. ADJUSTING THE FLASH HEAD Depress the Bounce “Up and Down” Lock and Releas e Button and adjust the flash head to the desired positio n. ◆ If appears on the LCD panel when you turn on the flash, and if t his mark blinks, then the flash head is adjusted to an incor rect positio ...

  • Sigma EF-530 - page 4

    17 2. Turn on the power switch of the flash, the ETTL (TTL) mark will appear on the LCD panel and the flash will start charging. 3. Focus on your subject. 4. Check that the sub ject is located within the effective distance range indicated on the LCD panel. 5. Press the shutter button, after the flash is fully charged. Note : When the flash is fully ...

  • Sigma EF-530 - page 5

    18 5. The manual flash output display will stop blinking and remain displayed after you press the SEL button again. 6. Adjust t he focusing by pressing the shutt er button, note the subjec t distance on the focus ring on the lens. Then adjust the lens’ aperture value or flash power level until the distance indicated on the LCD panel of the flashg ...

  • Sigma EF-530 - page 6

    19 FE LOCK “FE” lock mode allows you to choose and lock the exposure before taking the picture. 1. Set the camera’s exposure mode (“P”, “T v”, “Av”, “M” or “DEP”). 2. Set the flash’s mode to the E-TTL or the High S peed S ync. 3. Focus on the subject 4. Focus on the subject in the center AF frame of the viewfinder , and ...

  • Sigma EF-530 - page 7

    20 MUL TI FLASH MODE While the shutter is open, the flash will fire repeatedly . By doing so a series of images of the subject will be exposed in one frame. A bright subject with a dark background shows more effectively in this mode. It is possible to set the firing frequency between 1Hz and 199H z. Up to 100 flashe s can be fired continuousl y . T ...

  • Sigma EF-530 - page 8

    21 Channel Setting When other people are using Wireless Flash mode near you, your flash m ay be connected with the other person’s flash and your flash may fire. In this circumstance, please set a different channel for your flash from that of the other person’s . Channel setting for Master unit 1. Press the MODE button to Select the mar k. 2. Pr ...

  • Sigma EF-530 - page 9

    22 ◆ If the flash ratio is indicated as or , press the + or - button until 1:1 is displayed. 4. Place the Slave Unit at the desire d position. 5. Make sure that the Master Un it and Slave Unit have both been charged. ◆ Master Unit’s Ready Light is lit and Slave Unit’s AF Auxiliary Light is blinking. 6. Focus on the subject and take the pict ...

  • Sigma EF-530 - page 10

    23 Wireless Flash Exposure Compensation 1. Please set master flash unit to the Wireless Flash Mode. 2. Press the SEL button to make mark blink. 3. Press the + or - button to set the flash exposure comp ensation amount. 4. Press the SEL button several times to m ake exposure compensation indicator appear. ◆ It is not necessary to make any addition ...

  • Sigma EF-530 - page 11

    24 ◆ If there are only two slave units, please se lect the indicator at step 3 ( step 9 and step 10 should be omitted). Wireless Multi Flash Set the master flash unit as follows. 1. Follow the procedure for Changing the Wireless M ode , and set to the MUL TI / mar k. 2. Press the SEL button to make the firing fre quency display blink. 3. Press ...

  • Sigma EF-530 - page 12

    25 Designated Slave Flash If using two or more EF-530 DG Super fla sh units, you can designate which flash will fire together by using the channel settings. In this mode, one flash unit will be used as the S lave Controller and the others for firing as Slaves. Setting the Slave Flash unit(s) for firing 1. Attach the slave unit to the camera body . ...

Fabbricante Sigma Categoria Camera Flash

I documenti che otteniamo dal fabbricante del dispositivoSigma EF-530 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Sigma
- manuali per l’uso EF-530
- schede prodotto Sigma
- opuscoli
- o etichette energetiche Sigma EF-530
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Sigma EF-530.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Sigma EF-530, manuali di manutenzione, brevi manuali o manuali utente Sigma EF-530. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Sigma EF-530.

Manuali per l’uso simili

Manuale completo del dispositivo Sigma EF-530, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Sigma EF-530 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Sigma EF-530.

Il manuale per l’uso completo Sigma, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Sigma EF-530 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Sigma EF-530, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Sigma EF-530 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Sigma EF-530 - che ci dovrebbe aiutare nei primi passi durante l'uso Sigma EF-530
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Sigma EF-530
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Sigma EF-530 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Sigma EF-530?

Utilizza il modulo sottostante

Se non hai risolto il problema con Sigma EF-530 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Sigma EF-530 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)