Manuale per l’uso Life Fitness Ab/Back Machine

16 pagine 9.68 mb
Scarica

Vai alla pagina of 16

Summary
  • Life Fitness Ab/Back Machine - page 1

    Ab / Back Owners Manual ...

  • Life Fitness Ab/Back Machine - page 2

    2 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Qty 1 9 52 50 27 4 50 1 6 1 4 2 2 15 1 2 1 2 1 2 4 26 2 1 2 Tools Required: O 8mm Allen W rench O 3” Ratchet Extension O 9/16” W rench O 17mm W rench O 17mm Socket O 9/16” Socket O Ratchet O 8mm Hex Bit Description 3/8 x 73mm Hex Bolt 3/8 x 67mm Hex Bolt 3/8 SAE W asher ...

  • Life Fitness Ab/Back Machine - page 3

    3 ...

  • Life Fitness Ab/Back Machine - page 4

    4 Ab / Back 1. Assembly Instructions ...

  • Life Fitness Ab/Back Machine - page 5

    5 1. Assemble the TOWER (A) to the CAM FRAME (B) using two 3/8 X 92mm BOLTS (6), four 3/8 X 67mm BOLTS (2), twelve 3/8" SAE WASHERS (3), twelve 3/8" RH WASHERS (4), six 3/8" LOW HT LOCK NUTS (5) as shown. Finger tighten the bolts and nuts at this time. 2. Assemble the SEAT FRAME (C) to the CAM FRAME (B) using two 3/8 X 92mm BOLTS (6) ...

  • Life Fitness Ab/Back Machine - page 6

    6 Ab / Back 1. Assembly Instructions 7. WEIGHT STACK ASSEMBLY Insert the two GUIDE RODS (12) into the base of the TOWER (A) as shown. Slide two WEIGHT STACK CUSHIONS (13) down over the GUIDE RODS as shown. Lubricate the GUIDE RODS with a slicon or teflon spray that is available at most hardware stores. Using EXTREME CARE, slide fifteen 10 LB. WEIGH ...

  • Life Fitness Ab/Back Machine - page 7

    7 11. Wrap the ball end of the CABLE (8) around one 4-1/2" PULLEY (9) and SECURELY assemble the PULLEY to the FORWARD PIVOT ARM (L) as shown using one 3/8 X 46mm BOLT (39), one PULLEY COVER (28), one 3/8" SAE WASHER (3), one 3/8" RH WASHER (4) and one RH CAP (7). NOTE: Make sure the CABLE is in the groove of the PULLEY and the PULLEY ...

  • Life Fitness Ab/Back Machine - page 8

    8 Ab / Back 1. Assembly Instructions 13. Slide the metal ring of the WEIGHT STACK PIN (29) over the STEM on the HEAD PLATE ASSEMBLY (15) as shown. Screw the threaded end of the CABLE (8) into the STEM of the HEAD PLATE ASSEMBLY far enough that the HEAD PLATE just begins to lift off of the first WEIGHT PLATE. Then tighten jam nut SECURELY. Apply WEI ...

  • Life Fitness Ab/Back Machine - page 9

    9 18. SECURELY assemble the CAM SHROUD (40) to the CAM FRAME (B) using two 3/8 X 89mm BOLTS (41), four 3/8" SAE WASHERS (3), four 3/8" RH WASHERS (4), two 3/8" LOW HT LOCK NUTS (5) and four RH CAPS (7) as shown. 19. SHROUD ASSEMBLY SECURELY assemble the FRONT SHROUD (42) and the REAR SHROUD (43) to the TOWER (A) using ten 3/8 X 90mm ...

  • Life Fitness Ab/Back Machine - page 10

    10 Ab / Back 2. Safety & W arranty It is the sole responsibility of the purchaser of LIFE FITNESS products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its ...

  • Life Fitness Ab/Back Machine - page 11

    11 WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (Hip Abduction / Adduction) is warranted to be free of all defects in material and workmanship. WHO IS COVERED The original purchaser or any person receiving the Product as a gift from the original purchaser. WHO PAYS TRANSPORTATION & INSURANCE FOR SERVICE If the Produc ...

  • Life Fitness Ab/Back Machine - page 12

    12 Ab / Back 2. Safety & W arranty EXCLUSIVE WARRANTY THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither assume nor authorize ...

  • Life Fitness Ab/Back Machine - page 13

    13 General Specifications 1. Frame Construction Frame is constructed of mechanical quality steel purchased in mill run quantities Frame is primarily 2" x 3" tubing with 11 gauge wall thickness. 2. Frame Finish Prior to applying finish, each part is chemically washed to prepare surface for maximum adhesion 3. Bolts All hardware is metric a ...

  • Life Fitness Ab/Back Machine - page 14

    14 Abdominal Crunch 4. Exercise Abdominal Start Finish Back Start Finish ...

  • Life Fitness Ab/Back Machine - page 15

    15 CLEAN O Upholstery with a mild soap and water. O Hand grips with mild soap and water. INSPECT O Hardware should be checked for looseness. Tighten as required. O Frames should be inspected for wear or damage. All paint chips should be filled immediately with touch-up paint. O Handgrips should be checked for wear or damage. ONCE A DAY O Wipe down ...

  • Life Fitness Ab/Back Machine - page 16

    © 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitnessis a registered trademark of Brunswick Corporation. FSABBA 2.09.06 7887901 Rev A-3 ...

Fabbricante Life Fitness Categoria Home Gym

I documenti che otteniamo dal fabbricante del dispositivoLife Fitness Ab/Back Machine possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Life Fitness
- manuali per l’uso Ab/Back Machine
- schede prodotto Life Fitness
- opuscoli
- o etichette energetiche Life Fitness Ab/Back Machine
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Life Fitness Ab/Back Machine.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Life Fitness Ab/Back Machine, manuali di manutenzione, brevi manuali o manuali utente Life Fitness Ab/Back Machine. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Life Fitness Ab/Back Machine.

Manuali per l’uso simili

Manuale completo del dispositivo Life Fitness Ab/Back Machine, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Life Fitness Ab/Back Machine dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Life Fitness Ab/Back Machine.

Il manuale per l’uso completo Life Fitness, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Life Fitness Ab/Back Machine - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Life Fitness Ab/Back Machine, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Life Fitness Ab/Back Machine che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Life Fitness Ab/Back Machine - che ci dovrebbe aiutare nei primi passi durante l'uso Life Fitness Ab/Back Machine
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Life Fitness Ab/Back Machine
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Life Fitness Ab/Back Machine in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Life Fitness Ab/Back Machine?

Utilizza il modulo sottostante

Se non hai risolto il problema con Life Fitness Ab/Back Machine con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Life Fitness Ab/Back Machine è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)