Jura Capresso 13429の取扱説明書

29ページ 0.49 mb
ダウンロード

ページに移動 of 29

Summary
  • Jura Capresso 13429 - page 1

    I MP RE SSA X s 90 / X s 95 Instructions for use ...

  • Jura Capresso 13429 - page 2

    Legend:  DISPLAY: serves as information.  DISPLAY: please follow the instructions shown. = Note = Important = Tip ...

  • Jura Capresso 13429 - page 3

    Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 11 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 12 Fig. 9 Fig. 10 Fig. 13 1 2 3 Fig. 14 Fig. 15 ...

  • Jura Capresso 13429 - page 4

    1 2 3 17 7 10 9 8 12 11 13 14 16 15 18 19 21 20 22 26 25 24 23 27 6 4 5 Description of the machine 1. Drip tray 2. Drip grate 3. Programming door 4. Rotary Switch 5. Selection key for pre-ground coffee 6. Coffee à la Carte key 7. 1 Coffee key 8. 2 Coffees key 9. 1 Espresso key 10. 2 Espressos key 11. ON / OFF key 12. Rinse key 13. Display dialog s ...

  • Jura Capresso 13429 - page 5

    5 Contents 1. Safety information .............................................. page 6 1.1 Warnings ................................................ page 6 1.2 Precautions .............................................. page 6 2. Before you start using the IMPRESSA .................... page 6 2.1 Checking the mains voltage .......................... ...

  • Jura Capresso 13429 - page 6

    6 Before you begin Congratulations on having bought this IMPRESSA! In order to ensure perfect operation of your IMPRESSA, carefully read this operating manual and keep it for future reference. Should you need more information or meet with particular prob- lems not specified in these operating instructions in sufficient detail, please contact JURA E ...

  • Jura Capresso 13429 - page 7

    7 2.3 Filling the water tank Only use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids.  Take out the water tank and thoroughly rinse it out with cold tap water.  Then fill it with water and place it back into the coffee machine. Make sure the tank is installed correctly and that it engages properly. 2.4 ...

  • Jura Capresso 13429 - page 8

    8  Place a receptacle under the 2-stage frothing jet (24) and press one of the Steam keys .  The system now fills up automatically. A little water will leak from the frothing jet.  SYSTEM FILLING  HEATING UP  PRESS RINSE  Place a cup under the height-adjustable coffee spout (18).  Press Rinse .  MACHINE RINSING  Now the w ...

  • Jura Capresso 13429 - page 9

    9  Now turn the Rotary Switch (4) until the following message is displayed:  EXIT  Now press the Rotary Switch (4) to leave the programming mode.  SELECT PRODUCT 5. Using a CLARIS plus filter cartridge When using the CLARIS plus filter cartridge correctly, de- calcifying your IMPRESSA will no longer be necessary. For more information on ...

  • Jura Capresso 13429 - page 10

    10  Fill the water tank (14) with cold, fresh tap water and place it back into the machine.  Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys to start the filter rinsing process.  FILTER RINSING  Filter rinsing stops automatically.  SELECT PRODUCT You can also ...

  • Jura Capresso 13429 - page 11

    11  1 ESPRESSO (example) POWDER  The coffee brewing process stops automatically as soon as the set amount of water has run through.  SELECT PRODUCT To stop the brewing process prematurely, press any of the product keys. We recommend always using powder from fresh coffee beans or pre-ground, vacuum-packed coffee. Never fill in more than 2 s ...

  • Jura Capresso 13429 - page 12

    12 To stop the process prematurely, turn the switch (22) back to . You can also change the amount of water set while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approxi ...

  • Jura Capresso 13429 - page 13

    13  Dip the 2-stage frothing jet (24) into the milk and press the key.  DRAW OFF STEAM  When you have frothed the milk to your liking, pres the key again. 11.3 Attaching the Professional-Cappuccino Frother to the IMPRESSA  Remove the 2-stage frothing jet (24).  Now attach the Professional-Cappuccino Frother (Fig. 6).  Press the ho ...

  • Jura Capresso 13429 - page 14

    14  MACHINE RINSING  The coffee spout (18) is rinsed. 13. Programming The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste. The following parameters can be adjusted: ...

  • Jura Capresso 13429 - page 15

    15  SELECT PRODUCT  Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.  FILTER NO or YES  Turn the Rotary Switch (4) until the following message is dis- played:  POWDER QUANTITY  Now press the Rotary Switch (4) to start programming.  SELECT PRODUCT  Then press a product key of your ...

  • Jura Capresso 13429 - page 16

    16 13.6 Programming the temperature for coffee, espresso and coffee à la carte You can adjust the temperature for each type of coffee separately. The temperature can be set to 2 different levels (NORMAL, HIGH).  SELECT PRODUCT  Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.  FILTER NO or YES ...

  • Jura Capresso 13429 - page 17

    17  FILTER NO or YES  Turn the Rotary Switch (4) until the following message is dis- played:  STEAM PORTION  Press the Rotary Switch (4) to activate the program item.  PORTION 20 SEC (example)  Turn the Rotary Switch (4) to modify the steam portion and then confirm your setting by pressing the Rotary Switch (4).  STEAM PORTION ...

  • Jura Capresso 13429 - page 18

    18 Select this setting if you make mostly black coffees and are prepared to wait for approx. 1 minute before being able to draw steam. Economy mode 2 Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up each time you make coffee or need to draw steam. The IMPRESSA switches to economy temperatur ...

  • Jura Capresso 13429 - page 19

    19  Now press the Rotary Switch (4) to start programming.  UNIT ON —:—  Turn the Rotary Switch (4) to set the hours.  UNIT ON 07:00 (example)  Press the Rotary Switch (4) to confirm the hours and to activate the minutes.  UNIT ON 07:00  Turn the Rotary Switch (4) to set the minutes.  UNIT ON 07:15 (example)  Press the ...

  • Jura Capresso 13429 - page 20

    20  LANGUAGE ENGLISH  Turn the Rotary Switch (4) to set the language.  LANGUAGE ENGLISH (example)  Confirm your selection by pressing the Rotary Switch (4).  LANGUAGE ENGLISH  Now turn the Rotary Switch (4) until the following message is displayed:  EXIT  Now press the Rotary Switch (4) to leave the programming mode.  SEL ...

  • Jura Capresso 13429 - page 21

    21  Now press the Rotary Switch (4) to access the Information menu.  TOTAL 1000 (example)  Turn the Rotary Switch (4) to display how often you made espresso, 2 espressos, 1 coffee, 2 coffees, coffee à la carte, pow- der, water and steam.  Finally, the number of cleaning and decalcifying cycles and filter changes are displayed.  To e ...

  • Jura Capresso 13429 - page 22

    22 If this information is displayed, the machine will no longer make coffee. Refill water as described in Chapter 2.3.  SELECT PRODUCT The water tank should be rinsed out and filled with fresh water daily. Always use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids. 15.2 Emptying the coffee grounds  EMPTY ...

  • Jura Capresso 13429 - page 23

    23  Remove the screw in the bean tank (Fig. 9) and fold the finger protection device up (Fig. 10).  Insert the key (Fig. 11).  Now turn the key counter-clockwise until the jammed stone is released.  Remove any remaining powder with a vacuum cleaner.  Fold the finger protection device (Fig. 10) down and screw it tight.  Fill the be ...

  • Jura Capresso 13429 - page 24

    24 15.11 General cleaning instructions  Never use sharp objects or caustic chemicals for cleaning.  Clean the case using a soft, damp cloth.  Clean the pivoting steam spout (23) after each use.  After heating milk, draw off some hot water to clean the inside of the pivoting steam spout (23).  Remove the Professional-Cappuccino Frothe ...

  • Jura Capresso 13429 - page 25

    25  When the cleaning program has finished, take out the removable coffee powder tank and briefly rinse it under running water. You can also trigger a cleaning cycle manually at any point in time (see Chapter 13.3). 17. Decalcifying The IMPRESSA features an integrated decalcifying program. The process takes approx.50 minutes. Lime scale builds u ...

  • Jura Capresso 13429 - page 26

    26  You will hear an acoustic signal.  EMPTY TRAY / EMPTY GROUNDS  Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).  TRAY MISSING  Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA.  FILL WATER TANK / RINSE WATER TANK Thoroughly rinse out the water tank and fill it with fresh c ...

  • Jura Capresso 13429 - page 27

    27 20. Problems Problem Cause Remedy Grinding gear makes a very loud noise Foreign body in the grinding gear Please refer to Chapter 14.6 Too little froth when frothing milk Professional Cappuccino Frother clogged Clean frother (Chapter 11.5) Coffee only drips from the coffee spout Grinding degree too fine Adjust grinding gear to coarser grind Pre- ...

  • Jura Capresso 13429 - page 28

    28 21. Legal information These operating instructions contain all the information required for operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during mainte- nance. These ...

  • Jura Capresso 13429 - page 29

    Art. 67306 – 4/07 JURA Elektroappar ate A G – Kaffee weltstrasse 1 0 – CH-4626 Niederbuchsiten www.jura. com ...

メーカー Jura Capresso カテゴリー Coffeemaker

Jura Capresso 13429のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 13429の取扱説明書
- Jura Capressoの製品カード
- パンフレット
- またはJura Capresso 13429の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jura Capresso 13429の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jura Capresso 13429の取り付け説明書、サービスマニュアル、簡易説明書、またはJura Capresso 13429のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jura Capresso 13429の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jura Capresso 13429デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJura Capresso 13429を使用するのを助ける技術的文書のことです。説明書は通常、全てのJura Capresso 13429ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jura Capressoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jura Capresso 13429の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJura Capresso 13429の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jura Capresso 13429に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jura Capresso 13429デバイスの基本機能を使うにあたってのヒント。 Jura Capresso 13429のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jura Capresso 13429に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJura Capresso 13429のメーカー/サービスへの連絡先に関する情報。

Jura Capresso 13429についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJura Capresso 13429の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJura Capresso 13429で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)