English dropdown-ico

Manual Vulcan-Hart VSC2

12 pages 0.93 mb
Download

Go to site of 12

Summary
  • Vulcan-Hart VSC2 - page 1

    VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 INST ALLA TION & OPERA TION MANUAL For additional information on Vulcan-Hart Company or to locate an authorized parts and service provider in your area, visit our website at www.vulcanhart.com FORM 30914 Rev. A (Jan. 2003) VSC SERIES STEAMERS WITH STEAM COIL REGEN ...

  • Vulcan-Hart VSC2 - page 2

    – 2 – © VULCAN-HART COMPANY, 2003 ...

  • Vulcan-Hart VSC2 - page 3

    – 3 – Installation, Operation and Care of VSC SERIES STEAMERS With Steam Coil Regenerator SA VE THESE INSTRUCTIONS GENERAL Model VSC2 and VSC3 Steamers have two or three pressurized steaming compartments for cooking vegetables, fish, eggs and other foods. The heat exchanger in the cabinet base requires approximately 200 lb per hour of steam at ...

  • Vulcan-Hart VSC2 - page 4

    – 4 – INST ALLA TION UNPACKING Immediately after unpacking, check for possible shipping damage. If the steamer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. LOCATION Before installing, verify that the electrical supply agrees with the specifications on the data plate. Position the steame ...

  • Vulcan-Hart VSC2 - page 5

    – 5 – PLUMBING CONNECTIONS WARNING: PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE SANITARY, SAFETY AND PLUMBING CODES. Water Supply Connection The water filter, provided, must be installed in the water supply line going to the filtered water inlet or your steamer warranty may be voided. For incoming water supply line pressures, refer to the ...

  • Vulcan-Hart VSC2 - page 6

    – 6 – STEAM CONNECTION An adequate amount of steam must be delivered to the steamer to assure consistent steam cooking. Where possible, supply the steamer with a separate line from the steam source. If the steamer must be supplied from a line supplying other appliances, the pipe sizes and pressure must be verified. REQUIRED STEAM INPUT Allow fo ...

  • Vulcan-Hart VSC2 - page 7

    – 7 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. Refer to the electrical diagram located behind the access panel ...

  • Vulcan-Hart VSC2 - page 8

    – 8 – OPERA TION WARNING: THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE STEAMER. COMPARTMENT CONTROLS (Fig. 3) Fig. 3 Timer (0 to 60 minutes) - Sets the steam time for the compartment. Indicator Light - Timed cycle is in progress when lit. Selector Switch - Pressurized means top compartment operates at 6 ...

  • Vulcan-Hart VSC2 - page 9

    – 9 – STEAM REGENERATOR CONTROLS (Inside Cabinet) Main Power Switch - ON begins generation of clean steam by the heat exchanger. You should allow 20 minutes to generate steam. OFF opens the Automatic Blowdown valve. This empties the heat exchanger by releasing both water and steam to the drain. This should be done at least once daily to remove ...

  • Vulcan-Hart VSC2 - page 10

    – 10 – COOKING GUIDELINES The cooking guidelines in this manual are suggestions only. You should experiment with your food products to determine cooking times that will give you the best results. Variables which affect cooking time include size, weight, thickness of foods, temperature, density, previous condition of the foods (fresh, preblanche ...

  • Vulcan-Hart VSC2 - page 11

    – 11 – CLEANING WARNING : DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. Do not apply food oils or petroleum lubricants to the door gasket. At the end of the day, turn the main power switch OFF (automatic blowdown drains the boiler tank). Allow compartments to cool. Remove pans and side racks and wash in ...

  • Vulcan-Hart VSC2 - page 12

    – 12 – MAINTENANCE WARNING : THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE STEAMER. WARNING : DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. DELIMING Refer to the water filter manual shipped in the box with your steamer. LUBRICATION Once each month, lubricate the th ...

Manufacturer Vulcan-Hart Category Electric Steamer

Documents that we receive from a manufacturer of a Vulcan-Hart VSC2 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- VSC2 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart VSC2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart VSC2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart VSC2, service manual, brief instructions and user manuals Vulcan-Hart VSC2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart VSC2.

Similar manuals

A complete manual for the device Vulcan-Hart VSC2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart VSC2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart VSC2.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart VSC2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart VSC2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart VSC2, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart VSC2 - which should help us in our first steps of using Vulcan-Hart VSC2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart VSC2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart VSC2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart VSC2?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart VSC2, ask a question using the form below. If a user had a similar problem with Vulcan-Hart VSC2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)