English dropdown-ico

Manual Pelco EH3515

20 pages 0.61 mb
Download

Go to site of 20

Summary
  • Pelco EH3515 - page 1

    ® INST ALLA TION EH3508/EH3512/EH3515 Series Environmental Enclosure C478M-M (1/06) ...

  • Pelco EH3515 - page 2

    ...

  • Pelco EH3515 - page 3

    C478M-M (1/06) 3 Important Safety Instructions Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Only use attachments/accessories specifi ed by the manufacturer. 6. Use only with the cart, stand, tri ...

  • Pelco EH3515 - page 4

    4 C478M-M (1/06) Description The EH3508/EH3512/EH3515 Series are indoor/outdoor light-duty camera enclosures designed for use with various cameras on the market and accommodate fi xed focal length or motorized zoom lenses, with or without auto-iris operation. The lid of the enclosure is hinged in the front providing easy access during installation ...

  • Pelco EH3515 - page 5

    C478M-M (1/06) 5 Installation The following items are supplied to mount the enclosure: 2 1/4-20 x 0.500-inch hex head screws 2 Flat washers 2 Split washers The following items are supplied to mount the camera: 2 1/4-20 x 0.375-inch Phillips screws Figure 1. Package Contents HEX HEAD SCREWS FLAT WASHERS SPLIT WASHERS PHILLIPS SCREWS NUTS AND GLANDS ...

  • Pelco EH3515 - page 6

    6 C478M-M (1/06) Figure 2. Exploded View of EH3500 Series Assembly FLAT WASHER SPLIT WASHER HEX HEAD SCREW EM1450 WALL MOUNT (NOT SUPPLIED) GLANDS PHILLIPS SCREWS CAMERA SLED SLED MOUNTING SCREWS ...

  • Pelco EH3515 - page 7

    C478M-M (1/06) 7 Perform the following steps to install the enclosure, camera, and lens: 1. Unlatch and open the lid. 2. Remove the camera sled from the rail of the enclosure. a. Loosen the screws that hold the camera sled in place. b. Slide the sled forward so it can be lifted out over the screws. c. Remove the sled. d. Remove the parts bag tied t ...

  • Pelco EH3515 - page 8

    8 C478M-M (1/06) 9. If the enclosure has accessories that require power, you will need to access the PC board. T o remove the cover, insert a screwdriver into the slot on top of the cover and lift the cover off. Connect the power for the accessories to pins 1 and 2 on the PC board (refer to Figures 4, 5, and 6 for information about accessory wiring ...

  • Pelco EH3515 - page 9

    C478M-M (1/06) 9 Figure 4. EH3508-1/-2/-3 Wiring Diagram 1 2 3 4 5 6 7 8 9 10 HEA TER DEFROSTER INPUT , AC HIGH INPUT , AC LOW (NEUTRAL) 24/120/230 V AC MODELS ...

  • Pelco EH3515 - page 10

    10 C478M-M (1/06) Figure 5. EH3512 Series Wiring Diagram NOTE: Blower applies to -1/-2/-3 models only. 1 2 3 4 5 6 7 8 9 10 HEA TER DIODE BRIDGE INPUT , AC HIGH INPUT , AC LOW (NEUTRAL) 24 V AC MODEL DEFROSTER BLOWER RED BLK RED BLK CAP 1 2 3 4 5 6 7 8 9 10 INPUT , AC HIGH INPUT , AC LOW (NEUTRAL) 230 V AC MODEL DEFROSTER HEA TER 120 V AC BLOWER RE ...

  • Pelco EH3515 - page 11

    C478M-M (1/06) 11 Figure 6. EH3515 Series Wiring Diagram NOTE: Blower applies to -1/-2/-3 models only. 1 2 3 4 5 6 7 8 9 10 INPUT , AC HIGH INPUT , AC LOW (NEUTRAL) 120 V AC MODEL DEFROSTER BLOWER REAR HEA TER FRONT HEA TER 1 2 3 4 5 6 7 8 9 10 DIODE BRIDGE INPUT , AC HIGH INPUT , AC LOW (NEUTRAL) 24 V AC MODEL DEFROSTER BLOWER RED BLK RED BLK CAP ...

  • Pelco EH3515 - page 12

    12 C478M-M (1/06) T able A. Enclosure Accessory Wiring Distances The following cable sizs are the minimum recommended for sue with the heater and defroster combination in enclosures in the EH3508 Series, and the heater, defroster , and blower combination in enclosures in the EH3512 Series and Eh3515 Series only . WARNING: When using a single power ...

  • Pelco EH3515 - page 13

    C478M-M (1/06) 13 T able A. Enclosure Accessory Wiring Distances (Continued) Model Number Input V oltage Accessories Max. Power Consumption Cable Size Cable Distance EH3515-3 230 VAC at 50 Hz Heater Defroster Blower* 43 watts 20 AWG 18 AWG 16 AWG 14 AWG 6,473 ft (1,973 m) 10,291 ft (2,137 m) 16,365 ft (4,988 m) 26,019 ft (7,931 m) EH3515-1HD 120 VA ...

  • Pelco EH3515 - page 14

    14 C478M-M (1/06) Example: An enclosure that requires 30 VA and is installed 94 feet (28 m) from the transformer would require a minimum wire gauge of 20 A WG. NOTE: Distances are calculated in feet; values in parentheses are meters . *Minimum Cable Requirements 75 Ohms Impendance All-copper center conductor All-copper braided shield with 95% braid ...

  • Pelco EH3515 - page 15

    C478M-M (1/06) 15 Operation If your enclosure has a thermostatically controlled heater, the thermostat is set to turn on at 50°F (10°C) and to turn off at 80°F (27°C). If your enclosure has a blower and/or defroster, they operate continuously. MAINTENANCE Regularly scheduled maintenance prolongs the operational life and appearance of the equipm ...

  • Pelco EH3515 - page 16

    16 C478M-M (1/06) Specifications Camera Mounting Multiple holes on adjustable camera sled; camera sled mounts in threaded strip for easier removal and can be inverted for additional camera elevation Camera and Lens Size Accommodates camera and lens combinations (including BNC connector) up to 2.87” W x 3.00” H (7.28 x 7.62 cm) and the followin ...

  • Pelco EH3515 - page 17

    C478M-M (1/06) 17 Figure 7. EH3508, EH3512, EH3515 Dimension Drawing 5.14 (13.05) 3.88 (9.86) 2.00 (5.08) A B C EH3512 EH3515 A 14.75 (37.47) 17.75 (45.09) B 12.75 (32.38) 15.75 (40.00) C 1 1.25 (28.57) 14.25 (36.20) EH3508 10.75 (27.30) 8.75 (22.22) 7.32 (18.59) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES. This equipment con ...

  • Pelco EH3515 - page 18

    18 C478M-M (1/06) REVISION HISTORY Manual # Date Comments C478M-J 6/99 Moved the EH3508 Series enclosures from manual C1435M-A. Updated the description, installation instructions, and specifications. Updated wiring diagrams and dimension drawing. Modified per ECO 99-4749, which changed heater and defroster design. C478M-K 7/99 Incorporated addend ...

  • Pelco EH3515 - page 19

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series p ...

  • Pelco EH3515 - page 20

    ® Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Home Security System

Documents that we receive from a manufacturer of a Pelco EH3515 can be divided into several groups. They are, among others:
- Pelco technical drawings
- EH3515 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco EH3515
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco EH3515.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco EH3515, service manual, brief instructions and user manuals Pelco EH3515. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco EH3515.

Similar manuals

A complete manual for the device Pelco EH3515, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco EH3515 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco EH3515.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco EH3515 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco EH3515, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco EH3515, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco EH3515 - which should help us in our first steps of using Pelco EH3515
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco EH3515
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco EH3515 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco EH3515?

Use the form below

If you did not solve your problem by using a manual Pelco EH3515, ask a question using the form below. If a user had a similar problem with Pelco EH3515 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)