English dropdown-ico

Manual Emerson PMC-CGM

66 pages 1 mb
Download

Go to site of 66

Summary
  • Emerson PMC-CGM - page 1

    PMC-CGM Installation and Use 6806800D53C March 2008 ...

  • Emerson PMC-CGM - page 2

    © Copyright 2008 Emerson All rights reser ved. T rademarks Emerson is a trademark registered in the U.S. P atent and T rademar k Office. All other product or service names are the proper ty of their respective o wners. Intel ® is a trademark or registered trademark of Intel Cor poration or its subsidiarie s in the United States and other countrie ...

  • Emerson PMC-CGM - page 3

    PMC-CGM Installation and Use (6806800D53C) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson PMC-CGM - page 4

    PMC-CGM Installation and Use (6806800D53C) Contents 4 4.4 Configuring the PMC-CGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.4.1 Define IP Address of the Protection Par tner Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.4.2 Define SNMP Trap Destin ations . . . . . ...

  • Emerson PMC-CGM - page 5

    PMC-CGM Installation and Use (6806800D53C) 5 T able 1-1 Standard Co mpliances and Clo cking Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 T able 1-2 A vailable Board V arian ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 T able 2-1 Environmental Requir ements . . . . . . ...

  • Emerson PMC-CGM - page 6

    PMC-CGM Installation and Use (6806800D53C) List of Tables 6 ...

  • Emerson PMC-CGM - page 7

    PMC-CGM Installation and Use (6806800D53C) 7 Figure 1-1 PMC-CGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 2-1 Switch Loc ation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 2-2 Location of PMC S ...

  • Emerson PMC-CGM - page 8

    PMC-CGM Installation and Use (6806800D53C) List of Figures 8 ...

  • Emerson PMC-CGM - page 9

    PMC-CGM Installation and Use (6806800D53C) 9 About this Manual Overview of Contents This manual is divided into the f ollowing chapters and appendices . z Saf ety Notes on page 13 provide s saf ety relev ant information when handling th e product. z Sicherheitshinweise on page 17 pro vides a German translat ion of the Sa f ety Not es section. z Int ...

  • Emerson PMC-CGM - page 10

    PMC-CGM Installation and Use (6806800D53C) About this Manual 10 EMC Electromagnetic Compatibility EN European Nor m ESF Extended Super F rame ETSI European T elecommunications Standards Institute FCC F ederal Communications Commission FDL F acility Data Li nk FPGA Field Programmab le Gate-Arra y FPS F rames P er Second FW Firmware GmbH Gesellschaft ...

  • Emerson PMC-CGM - page 11

    About this Manual PMC-CGM Installation and Use (6806800D53C) 11 Con ventions The f ollowing tabl e describes the conv entions used throughout this ma nual. TPE T wisted-P air Etherne t UL Underwri ters Laboratories Incor porated VCCI V oluntar y Control Council for Interf erence VLAN Vir tual Local Area Network Abbreviation Definition Notation Desc ...

  • Emerson PMC-CGM - page 12

    PMC-CGM Installation and Use (6806800D53C) About this Manual 12 Summary of Chang es This manual has been revised and replaces all pr ior editions. Comments and Suggestions W e welcome an d appreciate y our comments on our docu mentation. W e want to kno w what you think about ou r manuals and ho w we can mak e them better . Mail comments to us by f ...

  • Emerson PMC-CGM - page 13

    PMC-CGM Installation and Use (6806800D53C) 13 Saf ety Notes This section pr ovides warnings that precede potentia ll y dangerous proc edures thro ughout this manua l. Instructions contained in the wa rnings must be follo wed during all phases of operation, s ervice, and repair of this equipment. Y ou should also emplo y all other safet y precaution ...

  • Emerson PMC-CGM - page 14

    PMC-CGM Installation and Use (6806800D53C) Safety Notes 14 Operation of this e quipment in a residential a rea is likely to cause ha rmful interference in which ca se the user will be required to correc t the interf erence at his own e xpense. Changes or modifications not exp ressly appr ov ed b y Emers on could v oid the user's authority to o ...

  • Emerson PMC-CGM - page 15

    Safety Notes PMC-CGM Installation and Use (6806800D53C) 15 Emerso n and our suppli ers take signifi cant steps to ensure there a re no bent pin s on the back plane or connector dama ge to the boards prior to leaving th e factory . Bent pins caused b y impro per installation or b y inser ting boar ds with damaged connect ors could v oid the Emerson ...

  • Emerson PMC-CGM - page 16

    PMC-CGM Installation and Use (6806800D53C) Safety Notes 16 ...

  • Emerson PMC-CGM - page 17

    PMC-CGM Installation and Use (6806800D53C) 17 Sicherheitshinw eise Dieses Kapitel enthält Hi nweise, die pote ntiell gefähr lichen Pr ozeduren innerhalb die ses Handbuchs v orrange stellt sind. Beachten Sie un bedingt in allen Phas en des Betr iebs, der W ar tung und der Reparatur de s Systems die Anweisungen, die diesen Hinweisen enthalten sind. ...

  • Emerson PMC-CGM - page 18

    PMC-CGM Installation and Use (6806800D53C) Sicherheitshinweise 18 Das Pr odukt arbeite t im Hochfre quenzbereich und erzeugt Stör strahlung. Bei unsachgemäßem Einbau und anderem als in diesem Handb uch beschriebenen Betrieb können Stö rungen im Hochfrequenzbere ich auftre ten. W arnung! Dies ist eine Einrichtung der Klasse A. Diese Ein richtun ...

  • Emerson PMC-CGM - page 19

    Sicherheitshinweise PMC-CGM Installation and Use (6806800D53C) 19 Emerson und uns ere Zuliefere r unternehmen gr ößte Anstrengungen um sicherzustellen, das s sich Pins und Stec ker von Boar ds vor dem V erlassung der Produk tionsstätte in einwandf reiem Zustand befinden . V erbogene Pins, verursa cht durc h fehlerhafte Installation oder dur ch I ...

  • Emerson PMC-CGM - page 20

    PMC-CGM Installation and Use (6806800D53C) Sicherheitshinweise 20 ...

  • Emerson PMC-CGM - page 21

    1 PMC-CGM Installation and Use (6806800D53C) 21 Introduction 1.1 Features The Cloc k Gener ator Module (PMC-CGM ) is a PMC module which is either a vailab le together with the Emerson A TCA-F103 s witch or as par t of an accessory kit. It can only be used in conjunction with the AR TM-F103-STX. The PMC-CGM is deliv ered with pa yload softwa re whic ...

  • Emerson PMC-CGM - page 22

    PMC-CGM Installation and Use (6806800D53C ) Introduction Standa rd Comp liances 22 The f ollowing graphic sho ws the PMC-CGM. 1.2 Standar d Compliances The PMC-CGM, when installed in a compliant chassis , meets the follo wing standards: Figure 1-1 PMC-CGM T able 1-1 Stan dard Compliances and Cloc king Standards Standard Description UL 60950-1, EN 6 ...

  • Emerson PMC-CGM - page 23

    Ordering Information Introd uction PMC-CGM Installation and Use (6806800D53C) 23 1.3 Or dering Information As of the printing date of this man ual, this guide su ppor ts the boards model listed below . G.703 BITS interf ace G.813 TR-1244 Clock quality ANSI/IPC-A610 Re v .C Class 2 ANSI/IPC-7711 ANSI/IPC-7721 ANSI-J-001...003 Manuf a cturing require ...

  • Emerson PMC-CGM - page 24

    PMC-CGM Installation and Use (6806800D53C ) Introduction Ordering Information 24 ...

  • Emerson PMC-CGM - page 25

    2 PMC-CGM Installation and Use (6806800D53C) 25 Hardw a re Prepar ation and Installation 2.1 Overview In this sectio n, you can find in formation on the following topics: z Things to obser ve bef ore the installation z Installation procedu re z A vailab le accessories 2.2 Bef ore Installation This section pro vides the f ollowing inf ormation: z Un ...

  • Emerson PMC-CGM - page 26

    PMC-CGM Installation and Use (6806800D53C ) Hardware Preparation and Installation Req uirements 26 2. Check f or damage and repor t any damage or diff erences to the customer ser vice. 3. Remov e the desiccant bag shipped together with the module an d dispose of it according to y our countr y’ s legislation. 2.2.2 Requirements Bef ore you po wer ...

  • Emerson PMC-CGM - page 27

    Requirements Hardware Preparation and Installation PMC-CGM Installation and Use (6806800D53C) 27 2.2.2.2 Power Requirements Mak e sure that the module is only used on an A TCA-F103 b lade in an AdvancedTCA shelf connected t o -48VDC up to - 60VDC (rated voltage), according to T eleco mmunication Networ k V oltage (TNV -2). A TNV -2 circuit is a cir ...

  • Emerson PMC-CGM - page 28

    PMC-CGM Installation and Use (6806800D53C ) Hardware Preparation and Inst allation Configuring the Module 28 2.3 Configuring the Module The module pro vides the configurat ion s witch SW1 as shown in the f ollowing figure . The s witch settings sho wn in the figure corr espond to the def ault settings. The s witches are displa yed as the small wh i ...

  • Emerson PMC-CGM - page 29

    Installing and Removing the Module Hardware Preparation and Installation PMC-CGM Installation and Use (6806800D53C) 29 2.4 Installing and Remo ving the Module The PMC-CGM can be installed on the PMC slot o f the Adv ancedTCA A TCA-F103 bl ade. T able 2-3 Switch Settings Switch Descriptio n SW1-1 Reserved (OFF: de f ault v alue) SW1-2 Reserved (OFF: ...

  • Emerson PMC-CGM - page 30

    PMC-CGM Installation and Use (6806800D53C ) Hardware Preparation and In stallati on Hardware Upgrades and Acessories 30 Bef ore installing an PMC module observe the f ollowing notes . Installation Procedure T o install the PMC module , proceed as f o llows: 1. Remov e the blind panel fro m the PMC slot of the A TCA-F103. 2. Store the b lind panel i ...

  • Emerson PMC-CGM - page 31

    3 PMC-CGM Installation and Use (6806800D53C) 31 Controls , LEDs and Connectors 3.1 Overview This chapter descr ibes: z Lay out z F ront panel connectors and LEDs 3.2 La yout The f ollowing figure sho ws the main components of t he PMC-CGM. 3.3 Fr ont P anel Connector s and LEDs At the front panel o f the PMC-CGM, there are the two RJ-45 connect ors ...

  • Emerson PMC-CGM - page 32

    PMC-CGM Installation and Use (6806800D53C ) Controls, LEDs and Co nnecto rs BITS Interface Connectors 32 The Ethernet por ts f or the PMC-CGM are located on the AR TM-F103. 3.3.1 BITS Interface Connectors The modu le provides two RJ-45 B ITS front pa nel connector s. Figure 3-2 F ront P anel Product Damage The RJ-45 connector( s) on the face plat e ...

  • Emerson PMC-CGM - page 33

    LEDs Controls, LEDs and Connectors PMC-CGM Installation and Use (6806800D53C) 33 Y ou can find th e signal description of th e the BITS connecto rs in the f ollowing figure where x is the numbe r of the BITS connector . 3.3.2 LEDs The product pro vides the follo wing LEDs. Figure 3-3 BITS Connector Location Figure 3-4 BITS Connector Pin Assignment ...

  • Emerson PMC-CGM - page 34

    PMC-CGM Installation and Use (6806800D53C ) Controls, LEDs and Conn ectors LEDs 34 Y ou can find a description of the LEDs in the f ollowing ta bl e. T able 3-1 LED Description Name Description B1 BITS Interface 1 Status Green: BITS interface 1 is in use and status is oka y Orange: BITS interface 1 is in use and status is not okay Red: : BITS inter ...

  • Emerson PMC-CGM - page 35

    4 PMC-CGM Installation and Use (6806800D53C) 35 Access and Configuration 4.1 Overview In this chapter , you can find inf or mation on the f ollowing topics: z How to access the module. z What to obser ve when using a MIB browser . z How to configure the module. 4.2 Accessing the PMC-CGM T o access the module y ou ha v e to pro vide the necessary ca ...

  • Emerson PMC-CGM - page 36

    PMC-CGM Installation and Use (6806800D53C ) Access and Configuration Cabling 36 4.2.1 Cabling T o access the PMC- CGM, you hav e to attach an Ethe rne t cable to the ARTM-F103-STX as shown in the f ollowing graphic. It is mandatory that you connect po r t ETH7 with ETHA on the same AR TM-F103-STX and that yo u cross-connect ETH8 with ETHB o n the p ...

  • Emerson PMC-CGM - page 37

    Using a MIB Browser Access and Configuration PMC-CGM Installation and Use (6806800D53C) 37 4.3 Using a MIB Br owser When y ou are using a MIB bro wser to configure the PMC-CGM, y ou ha ve to use the f ollowing settings. 4.4 Configuring the PMC-CGM T o configure the PMC-CGM, you can perf orm th e follo wing tasks whic h ar e described in detail in t ...

  • Emerson PMC-CGM - page 38

    PMC-CGM Installation and Use (6806800D53C ) Access and Configuration Def ine IP Address of the Protec tion Partner Module 38 Y ou can perf or m these tasks independe ntly from each oth er . 4.4.1 Define IP Address of the Pr otection P ar tner Module The PMC-CGM modules usually wo rk in a master/sla v e configura tion. The protection par tner is the ...

  • Emerson PMC-CGM - page 39

    Configure the Interface Mode Access and Configuration PMC-CGM Installation and Use (6806800D53C) 39 4.4.3 Configure the Interface Mode Y ou can chose betwee n SONET/T1 and SDH/E1 mode via th e MIB object cgmI nterf aceMode OID: .1.3.6 .1.4.1.3 656.8152. 1.1.10.0. The modes ar e used in d iff erent regions . This entry deter mines whether an input f ...

  • Emerson PMC-CGM - page 40

    PMC-CGM Installation and Use (6806800D53C ) Access and Configuration Configu re Initial Master/Slave Role 40 4.4.5 Configure Initial Master/Slave Role After the initial conf iguration, the master/sla ve roles are handled b y the DPLL software t hat runs on the processor of the PMC-CG M. Configuring the initial master/slave roles T o configure the i ...

  • Emerson PMC-CGM - page 41

    Configure the Reference Clock Access and Configuration PMC-CGM Installation and Use (6806800D53C) 41 4.4.7 Configure the Reference Cloc k Y ou can def ine the ref erence cloc k source, the freque ncy and the priority of the ref erence clock inputs. F o r a descriptio n of the respective MIB objects refer to T able "cg mInputT able" on p a ...

  • Emerson PMC-CGM - page 42

    PMC-CGM Installation and Use (6806800D53C ) Access and Configuration Perform Firmware/Software Upgrade 42 7. F or the T4 path, repeat steps 5 and 6 with the cgmT4InputPriority object OID:.1.3.6.1.4.1.3656.8152.1.1.1 .1.5.<ins tance n umber which is equal to input number -1>. 8. Go to cgmInputRefASource object OID:.1.3.6.1.4.1 .3656.8152.1.4.1 ...

  • Emerson PMC-CGM - page 43

    Reset the PMC-CGM Access and Configuration PMC-CGM Installation and Use (6806800D53C) 43 8. Enter the chec ksum (hexadecinal f or mat) of the ne w image which is contained in the .md5 file deliv ered together with the new image . This chec ksum is v er ified after downlo ading the TFTP image and after programming it into the boot flash. 9. Go to th ...

  • Emerson PMC-CGM - page 44

    PMC-CGM Installation and Use (6806800D53C ) Access and Configuration Configure Parameters for Event Handling 44 4. Set object to restar t (1). 4.4.10 Configure P arameters f or Event Handling Y ou can use the f ollowing elements as par ameters to defin e how e vents are han dled in y our system. z cgmSysEv entLogSize z cgmSysEv entLogCount z cgmSys ...

  • Emerson PMC-CGM - page 45

    Configure Parameters for Event Ha ndling Access and Con figuration PMC-CGM Installation and Use (6806800D53C) 45 2 - Critical ev ents and warnings are logged 3 - Critical ev ents, w arning and ev ents are logged 4 - Ev er ything is logged Def ault v alue is (3). 7. Check the de f ault v alue and adapt it if necessar y . 8. Go to cgmSysEv entT rapLe ...

  • Emerson PMC-CGM - page 46

    PMC-CGM Installation and Use (6806800D53C ) Access and Configuration Configure Parameters for Event Handling 46 ...

  • Emerson PMC-CGM - page 47

    5 PMC-CGM Installation and Use (6806800D53C) 47 MIB Descr iption 5.1 Overview Y ou can use the CGM-CO NTROL-MI B to access and control the cloc k generator module PMC- CGM that is used in y our Adv ancedTCA system. It is located at .iso . org.dod.inter net .private.enter prises.forceComputers.cgmCon trolMIB.motCgm (OI D: .1.3.6.1.4. 1 .3656 .8152 . ...

  • Emerson PMC-CGM - page 48

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmControl 48 .1.1.1.1.3 cgmInpu tF requency Configures the input frequency: 0: 8 KHz 1: 1544 KHz / 2048 KHz, d epending on E1/T1 operation. 3: 19.44 MHz r/w .1.1.1.1.4 cgmT0InputPr iority This setting is applied to the protection par tner as well. A prior ity value from 2 to 15 used b y t ...

  • Emerson PMC-CGM - page 49

    cgmControl MIB Description PMC-CGM Installation and Use (6806800D53C) 49 The cgmBitsT ab le (OID: .1.3.6 .1.4.1 .365 6 .8152.1.1.2) uses bitsInterf aceNumber as inde x. T able 5-4 cgmBitsT able OID MIB Object Description Access .1.1.2.1.1 bitsInterf aceNumbe r 0 f or BITS interface 1 1 f or BITS interface 2 r .1.1.2.1.2 bitsEnable Enables (0) or di ...

  • Emerson PMC-CGM - page 50

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmControl 50 .1.1.2.1.6 dsx1LoopbackConfig Loo pback mode Loopback mode disab led (1) local (pa yload) loopback - Tx to Rx (2) line loopback - Rx to Tx (3) Def ault value is disabled (1). r/w .1.1.2.1.7 dsx1LineStatus Current line status. This is a bit mask encodin g the f ollowing states ...

  • Emerson PMC-CGM - page 51

    cgmControl MIB Description PMC-CGM Installation and Use (6806800D53C) 51 .1.1.2.1.35 bitsL iuRxLev el Receive le vel in dB 2.5 (0) 5.0 (1) 7.5 (2) 10.0 (3) 12.5 (4) 15.0 (5) 17.5 (6) 20.0 (7) 22.5 (8) 25.0 (9) 27.5 (10) 30.0 (11) 32.5 (12) 35.0 (13) 37.5 (14) 40.0 (15) r .1.1.2.1.63 bitsT1RxSync Re synchronization criter ia. In D4 framing mode: - o ...

  • Emerson PMC-CGM - page 52

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmControl 52 .1.1.2.1.81 bitsT1T raiCi T ransmit RAI-CI Setting this b it causes the ESF R AI-CI code to be transmitted in the FDL bit position. Def ault value is (0). r/w .1.1.2.1.91 bitsE1RxSyncC F ram e resynchronization criteria Def ault value is (0). r/w .1.1.2.1.112 bitsT3ClkF orce ...

  • Emerson PMC-CGM - page 53

    cgmControl MIB Description PMC-CGM Installation and Use (6806800D53C) 53 The f ollowing tabl e describes the elements of the cgmContro l MIB branch (OID:.1.3. 6.1.4.1 .3656 .8152.1 .1). .1.1.2.1.116 bitsT estP atter nT ype Determines the type of the ge nerated test patter n. fixed(0) to use a pattern as defined in bitsT estP attern / bitsT estPatte ...

  • Emerson PMC-CGM - page 54

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmControl 54 .1.1.19 cgmProtectionState Indicates whet her this module is the master or slav e of a protection pair: 0 - standaloneMa ster : Communication with the par tner is not possi ble and the module is running in master mode. 1 - slav e 2 - master r .1.1.20 cgmProtectionCmd Can be u ...

  • Emerson PMC-CGM - page 55

    cgmSys MIB Description PMC-CGM Installation and Use (6806800D53C) 55 5.3 cgmSys The cgmSys branch contains the f ollowing inf o rma tion: z cgmEv entT able - f or details ref er to T abl e 5-6 on page 55 . z V ar ious MIB objects th at are descr ibed in T able 5-8 on page 58 . F or a description on ho w to use these objects ref er to Configure P ar ...

  • Emerson PMC-CGM - page 56

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmSys 56 The f ollowing table lists all e vent codes and their se v erity . Events which cause the mod ule to giv e up mastership ar e marked with an asterisk in the "se verity" column. .1.3.1.1.4 cgmEventCode A pre-defined ev ent cod e - f or details refer to T able 5-7 on page ...

  • Emerson PMC-CGM - page 57

    cgmSys MIB Description PMC-CGM Installation and Use (6806800D53C) 57 bitsRlos/c (31/35) Event "Loss of signal" / "loss of signa l cleared" e vent detected on a BITS interf ace. EventData: The BITS interf ace on which the ev ent has been detected (0 o r 1). bitsRais/c (32/36) Event "Alar m indica tion" / "Alar m in ...

  • Emerson PMC-CGM - page 58

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmSys 58 The f ollowing table de scribes the elements of the cgmSys MIB br anch (OID:.1.3. 6.1.4.1 .3656 .8152.1.3 ). The y prov ide genera l control and status oper ations for t he e vent log. genSysError (1000) W ar ning A general system error . F or debugging only . genSysErrorC (1001) ...

  • Emerson PMC-CGM - page 59

    cgmSys MIB Description PMC-CGM Installation and Use (6806800D53C) 59 .1.3.23 c gmSysHwV ersion The hardware re vi sion of the PMC-CGM. r .1.3.24 cgmSysSwV ersi on The fir mware re visi on of the board in the format "x.y .z" which corresponds to "< major revision>.<minor re vision>.<build count>. r .1.3.25 cgmRestar ...

  • Emerson PMC-CGM - page 60

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmClkDist 60 5.4 cgmClkDist The cgmClkDist branch contains the follo wing inf ormation which is used f or controlling clock distrib ution and measurement : z cgmDmClkT able - not supp or ted f or the PMC-CGM. z cgmF rqMonT able - not supported f or the PMC-CGM. z V ar ious MIB objects th ...

  • Emerson PMC-CGM - page 61

    cgmClkDist MIB Description PMC-CGM Installation and Use (6806800D53C) 61 The f ollowing tabl e describes the elements of the cgmClkDist MIB br anch (OID:.1.3. 6.1.4.1 .3656 .8152.1 .4). T able 5-9 cgmClkDist Objects OID MIB Object Description Access .1.4.10 cgmClkDistMode The clock distribution mode of the module. There are f our main modes a modul ...

  • Emerson PMC-CGM - page 62

    PMC-CGM Installation and Use (6806800D53C ) MIB Description cgmClkDist 62 .1.4.16 cgmInputRefASource Dete rmines the sou rce of the "pr imary " linecard derived reference clock (REF A inpu t to PLL). local reference A (0) local reference B (1) Chassis 2 ref erence A (2) Chassis 2 ref erence B (3) Chassis 3 ref erence A (4) Chassis 3 ref e ...

  • Emerson PMC-CGM - page 63

    A PMC-CGM Installation and Use (6806800D53C) 63 A Related Documentation A.1 Emer son Netw ork P o wer - Embedded Computing Documents The Emerson Netw ork P ower - Embedded Computing pub lications listed below ar e ref erenced in this manu al. Y ou can o btain electronic cop ies of Emerson Ne twork P ow er - Embedde d Computing pub lications by cont ...

  • Emerson PMC-CGM - page 64

    PMC-CGM Installation and Use (6806800D53C ) Related Documentation R elated Specifications 64 ...

  • Emerson PMC-CGM - page 65

    PMC-CGM Installation and Use (6806800D53C) 65 A Abbreviations 9 Access 35 Cabling 36 IP addresses 37 Via IPMI 36 Via MIB browser 37 ATCA-F103 21 PMC slot on 29 PMC-CGM support on 21 B BITS interface 32 Configuration 39 Connector 33 LEDs 34 MIB objects 49 Blind panel 30 C Clock distribution cable 30 Clocking concept 21 Clocking standards 22 Complian ...

  • Emerson PMC-CGM - page 66

    PMC-CGM Installation and Use (6806800D53C) 66 Unpacking the module 25 Upgradi ng the firmware 42 Protection partner 21 , 38 R Reference clock 41 Configuration 41 MIB objects 47 , 61 Requirements 26 Environmenta l 27 Power 27 Reset 43 Via IPMI 43 Via SNMP 43 RoHS 23 S Safety notes 13 SDH 39 SONET 39 Standard compliances 22 SW1 28 Switch settings 28 ...

Manufacturer Emerson Category Computer Hardware

Documents that we receive from a manufacturer of a Emerson PMC-CGM can be divided into several groups. They are, among others:
- Emerson technical drawings
- PMC-CGM manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson PMC-CGM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson PMC-CGM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson PMC-CGM, service manual, brief instructions and user manuals Emerson PMC-CGM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson PMC-CGM.

Similar manuals

A complete manual for the device Emerson PMC-CGM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson PMC-CGM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson PMC-CGM.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson PMC-CGM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson PMC-CGM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson PMC-CGM, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson PMC-CGM - which should help us in our first steps of using Emerson PMC-CGM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson PMC-CGM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson PMC-CGM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson PMC-CGM?

Use the form below

If you did not solve your problem by using a manual Emerson PMC-CGM, ask a question using the form below. If a user had a similar problem with Emerson PMC-CGM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)