English dropdown-ico

Manual Manley Labs 300B

12 pages 0.15 mb
Download

Go to site of 12

Summary
  • Manley Labs 300B - page 1

    MANLEY LABORA TORIES, INC. MANLEY LABORA TORIES, INC. 13880 MAGNOLIA A VE. CHINO, CA. 91710 TEL: (909) 627-4256 F AX: (909) 628-2482 OWNER'S MANUAL MANLEY NEO-CLASSIC SE / PP 300B AMPLIFIER ...

  • Manley Labs 300B - page 2

    CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR AMPLIFIER 5 DIAGRAM 2 TOP PANEL 6 BIAS PROCEDURES 7 OPERATIONAL NOTES 8 SPECIFICATIONS 9 WARRANTY 10 WARRANTY REGISTRATION 11 SECTION PAGE ...

  • Manley Labs 300B - page 3

    INTRODUCTION THANK YOU!... for choosing the Manley Neo-Classic SE / PP 300B Monoblock Amplifiers. The Manley Neo-Classic SE / PP 300B Amplifiers use only the best available components, with the shortest and cleanest signal path possible. These amps have the unique ability to switch from Single ended to Push-Pull topologies and the ability to adjust ...

  • Manley Labs 300B - page 4

    READ THIS PAGE BEFORE YOU SET UP THE AMPS, PLEASE READ THIS PAGE BEFORE YOU SET UP THE AMPS, PLEASE READ THIS PAGE BEFORE YOU SET UP THE AMPS, PLEASE READ THIS PAGE BEFORE YOU SET UP THE AMPS, PLEASE READ THIS PAGE BEFORE YOU SET UP THE AMPS, PLEASE Pay special attention to pin Pay special attention to pin Pay special attention to pin Pay special a ...

  • Manley Labs 300B - page 5

    MAINS CONNECTIONS Your amplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply. Export units for certain markets have a moulded mains plug fitted to comply with local requirements. If your unit does not ...

  • Manley Labs 300B - page 6

    CONNECTING YOUR AMPLIFIER Setting up your amplifiers is rather easy. 1. Connect all source components (turntable, CD, Tuner, Tape DAT, etc.) to your preamplifier. 2. Connect the interconnects from the output of the preamplifier or switching center to the RCA input on the top rear of the amplifiers. 3. Connect the hot or "+" speaker cable ...

  • Manley Labs 300B - page 7

    MANLEY SE / PP 300B TRIODE MONOBLOCK AMPLIFIER D E I H J Amplifier Overhead View A RCA Input Jack B Speaker Terminals C Mains input IEC/Switch module Mains fuse - Replace only with same type and value Power Switch D Tube 5U4 Rectifier E Tube 5U4 Rectifier F Power Tube 300B G Power Tube 300B H Bias trimmer ( for F & L ) I Bias trimmer ( for G &a ...

  • Manley Labs 300B - page 8

    OPERATIONAL NOTES SWITCHING SINGLE-ENDED 11 / PUSH-PULL 24: This amplifier has the unique feature of being able to choose between two circuit topologies. You are able to switch between each mode while the amplifier is turned on and playing music. In SINGLE-ENDED mode the amplifier uses both 300Bs in parallel. The advantage is a minimalist circuit r ...

  • Manley Labs 300B - page 9

    5.) The correct bias reading in "Single-Ended" mode is 550 mVDC. A reading of 540-560mVDC will be within specs. The bias in single-ended mode was set at the factory. If, however, the S-E bias reading is out of spec after warm up, the bias may be adjusted as follows: 6.) Carefully turn the amp on it's left side, Be sure to brace the a ...

  • Manley Labs 300B - page 10

    SPECIFICATIONS Vacuum Tubes: 2 x 300B (Output), 1 x 6SN7 (Driver), 1 x 6SL7 (Input) 2 x 5U4 (Rectifier) Output Power @ 1Khz SINGLE-ENDED: 5 dB FB - 11 Watts @ 3% THD. PUSH-PULL: 5 dB FB - 24 Watts @ 1.5% THD. Frequency Response +/- .5 dB SINGLE-ENDED: 5 dB FB - 15 Hz - 15 Khz (measured at 5 watts) PUSH-PULL: 5 dB FB - 10 Hz - 20 Khz Input Sensitivi ...

  • Manley Labs 300B - page 11

    W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only. A further optional limited 5 year transferrable warranty is available upon proper registration of ownership within 30 days of date of first purchase. ...

  • Manley Labs 300B - page 12

    W ARRANTY REGISTRA TION We ask, grovel and beg that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 USA Or you may FAX this form in to: +1 (909) 628-2482 or you may fill in the online warranty registration form found in the Tech Support section o ...

Manufacturer Manley Labs Category Car Amplifier

Documents that we receive from a manufacturer of a Manley Labs 300B can be divided into several groups. They are, among others:
- Manley Labs technical drawings
- 300B manuals
- Manley Labs product data sheets
- information booklets
- or energy labels Manley Labs 300B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Manley Labs 300B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Manley Labs 300B, service manual, brief instructions and user manuals Manley Labs 300B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Manley Labs 300B.

Similar manuals

A complete manual for the device Manley Labs 300B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Manley Labs 300B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Manley Labs 300B.

A complete Manley Labs manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Manley Labs 300B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Manley Labs 300B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Manley Labs 300B, that we can find in the current document
3. Tips how to use the basic functions of the device Manley Labs 300B - which should help us in our first steps of using Manley Labs 300B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Manley Labs 300B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Manley Labs 300B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Manley Labs 300B?

Use the form below

If you did not solve your problem by using a manual Manley Labs 300B, ask a question using the form below. If a user had a similar problem with Manley Labs 300B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)