Bedienungsanleitung Pelco C1901M (4/99)

12 Seiten 0.18 mb
Download

Zur Seite of 12

Summary
  • Pelco C1901M (4/99) - page 1

    MC3800 Series 1/3-Inch Monochr ome Camera Installation/ Operation Manual C1901M (4/99) Pelco • 3500 Pelco Way • Clovis , CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ...

  • Pelco C1901M (4/99) - page 2

    2 Pelco Manual C1901M (4/99) IMPOR T ANT SAFEGUARDS AND W ARNINGS 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. T o pre v ent fire or shock hazard, do not e xpose the unit to rain or moisture . DESCRIPTION The MC3800 Series cameras are 1/3-inch format monochrome CCD (charge coupl ...

  • Pelco C1901M (4/99) - page 3

    Pelco Manual C1901M (4/99) 3 NOTE: References to illus- trations in this manual are keyed to the illustrations in the manual that is supplied with the camera. MC3800-2 MC3800-2X MC3800-3 10 11 10 11 13 12 3 4 5 6 7 8 9 2 1 LOCA TION AND FUNCTION OF P ARTS Refer to Illustration B for the location of the camera parts. B T op/Front/Side/Rear V iews of ...

  • Pelco C1901M (4/99) - page 4

    4 Pelco Manual C1901M (4/99) D Changing the Plug on an Auto Iris Lens Cable 2 3 4 1 1 2 3 4 Cover (supplied) Auto-iris lens cable Rib (If the cable is thick and the plug cover does not seat properly , cut away this rib.) Lens plug (supplied) 42 1 3 Pin # DC-servo Lens Pin 3: Drive (+) Pin 1: Control (-) Pin 2: Control (+) Pin 4: Drive (-) (Ground) ...

  • Pelco C1901M (4/99) - page 5

    Pelco Manual C1901M (4/99) 5 E C CS 2 1 4 3 Lens Installation A CCD-IRIS ON OFF CCD-Iris Function ...

  • Pelco C1901M (4/99) - page 6

    6 Pelco Manual C1901M (4/99) NOT A V AILABLE ON 3800 SERIES Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the number the more closed the iris is. IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small ...

  • Pelco C1901M (4/99) - page 7

    Pelco Manual C1901M (4/99) 7 Information Box Information Box LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUT O IRIS • Turn Manual Iris ring so iris is fully open and set the Focus ring for ∞ (or distant object). • Adjust Backfocus with CCD IRIS switch initially set to the OFF position. • Use the C/CS adjust- m ...

  • Pelco C1901M (4/99) - page 8

    8 Pelco Manual C1901M (4/99) Information Box Information Box The purpose of backfocusing is to make the adjustments necessary for the picture to remain in focus throughout the camera’s zoom range, which is the case for instance, in motorized zoom, auto iris configurations. Manual Iris lens/camera combinations also need to be backfocused. Follow t ...

  • Pelco C1901M (4/99) - page 9

    Pelco Manual C1901M (4/99) 9 G Connecting the Monitor to the MC3800 Series Cameras F Connecting the MC3800-2 12 3 1 2 CAMERA Install the camera where it will not be affected by fluorescent lights or window reflections. If the camera is used under illumination that is not steady , the picture may flicker . The MC3800-2 must be operated with a 24 V A ...

  • Pelco C1901M (4/99) - page 10

    10 Pelco Manual C1901M (4/99) I V ertical Phase V ertical phase adjustment is not vertical roll adjustment. Each camera is adjusted to the AC zero crossover point at the factory . Problems arise, however, especially in larger systems, when: 1. Switching rapidly between widely separated cameras with manual or sequential switchers. 2. Switching betwe ...

  • Pelco C1901M (4/99) - page 11

    Pelco Manual C1901M (4/99) 11 INCIDENT LIGHT LEVEL ADJUSTMENT Since the incident light level has been preset at the factory , usually no further adjustment is required. If the picture is too dark, however , or if the picture’s highlights are extremely overexposed, adjust the LEVEL adjustment screw . This adjustment can only be used for auto-iris ...

  • Pelco C1901M (4/99) - page 12

    12 Pelco Manual C1901M (4/99) REVISION HISTOR Y Manual # Date Comments C1901M 1 1/96 Original version. 4/99 Added MC3800-2X model. Revised manual to new format. ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. Power Consumption: MC3800-2: Approximately 4.5 W MC3800-2X: Approximately 4.5 ...

Produzent Pelco Kategorie Carbon Monoxide Alarm

Dokumente, die wir vom Produzenten des Geräts Pelco C1901M (4/99) erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pelco
- Bedienungsanleitungen C1901M (4/99)
- Produktkarten Pelco
- Informationsbroschüren
- oder Energieetiketten Pelco C1901M (4/99)
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pelco C1901M (4/99).

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pelco C1901M (4/99), Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pelco C1901M (4/99). Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pelco C1901M (4/99) ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pelco C1901M (4/99), wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pelco C1901M (4/99) hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pelco C1901M (4/99) verständlich ist.

Eine gänzliche Bedienungsanleitung von Pelco sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pelco C1901M (4/99) bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pelco C1901M (4/99) befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pelco C1901M (4/99), die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pelco C1901M (4/99) - die uns die ersten Schritte während der Nutzung von Pelco C1901M (4/99) erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pelco C1901M (4/99) hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pelco C1901M (4/99) im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pelco C1901M (4/99)?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco C1901M (4/99) nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco C1901M (4/99) hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)