Manual de instrucciones Pelco C1901M (4/99)

12 de páginas 0.18 mb
Descargar

Pasar a la página of 12

Summary
  • Pelco C1901M (4/99) - page 1

    MC3800 Series 1/3-Inch Monochr ome Camera Installation/ Operation Manual C1901M (4/99) Pelco • 3500 Pelco Way • Clovis , CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ...

  • Pelco C1901M (4/99) - page 2

    2 Pelco Manual C1901M (4/99) IMPOR T ANT SAFEGUARDS AND W ARNINGS 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. T o pre v ent fire or shock hazard, do not e xpose the unit to rain or moisture . DESCRIPTION The MC3800 Series cameras are 1/3-inch format monochrome CCD (charge coupl ...

  • Pelco C1901M (4/99) - page 3

    Pelco Manual C1901M (4/99) 3 NOTE: References to illus- trations in this manual are keyed to the illustrations in the manual that is supplied with the camera. MC3800-2 MC3800-2X MC3800-3 10 11 10 11 13 12 3 4 5 6 7 8 9 2 1 LOCA TION AND FUNCTION OF P ARTS Refer to Illustration B for the location of the camera parts. B T op/Front/Side/Rear V iews of ...

  • Pelco C1901M (4/99) - page 4

    4 Pelco Manual C1901M (4/99) D Changing the Plug on an Auto Iris Lens Cable 2 3 4 1 1 2 3 4 Cover (supplied) Auto-iris lens cable Rib (If the cable is thick and the plug cover does not seat properly , cut away this rib.) Lens plug (supplied) 42 1 3 Pin # DC-servo Lens Pin 3: Drive (+) Pin 1: Control (-) Pin 2: Control (+) Pin 4: Drive (-) (Ground) ...

  • Pelco C1901M (4/99) - page 5

    Pelco Manual C1901M (4/99) 5 E C CS 2 1 4 3 Lens Installation A CCD-IRIS ON OFF CCD-Iris Function ...

  • Pelco C1901M (4/99) - page 6

    6 Pelco Manual C1901M (4/99) NOT A V AILABLE ON 3800 SERIES Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the number the more closed the iris is. IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small ...

  • Pelco C1901M (4/99) - page 7

    Pelco Manual C1901M (4/99) 7 Information Box Information Box LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUT O IRIS • Turn Manual Iris ring so iris is fully open and set the Focus ring for ∞ (or distant object). • Adjust Backfocus with CCD IRIS switch initially set to the OFF position. • Use the C/CS adjust- m ...

  • Pelco C1901M (4/99) - page 8

    8 Pelco Manual C1901M (4/99) Information Box Information Box The purpose of backfocusing is to make the adjustments necessary for the picture to remain in focus throughout the camera’s zoom range, which is the case for instance, in motorized zoom, auto iris configurations. Manual Iris lens/camera combinations also need to be backfocused. Follow t ...

  • Pelco C1901M (4/99) - page 9

    Pelco Manual C1901M (4/99) 9 G Connecting the Monitor to the MC3800 Series Cameras F Connecting the MC3800-2 12 3 1 2 CAMERA Install the camera where it will not be affected by fluorescent lights or window reflections. If the camera is used under illumination that is not steady , the picture may flicker . The MC3800-2 must be operated with a 24 V A ...

  • Pelco C1901M (4/99) - page 10

    10 Pelco Manual C1901M (4/99) I V ertical Phase V ertical phase adjustment is not vertical roll adjustment. Each camera is adjusted to the AC zero crossover point at the factory . Problems arise, however, especially in larger systems, when: 1. Switching rapidly between widely separated cameras with manual or sequential switchers. 2. Switching betwe ...

  • Pelco C1901M (4/99) - page 11

    Pelco Manual C1901M (4/99) 11 INCIDENT LIGHT LEVEL ADJUSTMENT Since the incident light level has been preset at the factory , usually no further adjustment is required. If the picture is too dark, however , or if the picture’s highlights are extremely overexposed, adjust the LEVEL adjustment screw . This adjustment can only be used for auto-iris ...

  • Pelco C1901M (4/99) - page 12

    12 Pelco Manual C1901M (4/99) REVISION HISTOR Y Manual # Date Comments C1901M 1 1/96 Original version. 4/99 Added MC3800-2X model. Revised manual to new format. ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. Power Consumption: MC3800-2: Approximately 4.5 W MC3800-2X: Approximately 4.5 ...

Fabricante Pelco Categoría Carbon Monoxide Alarm

Los documentos del dispositivo Pelco C1901M (4/99) que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Pelco
- manuales de instrucciones C1901M (4/99)
- hojas de producto Pelco
- folletos informativos
- o etiquetas energéticas Pelco C1901M (4/99)
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Pelco C1901M (4/99).

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Pelco C1901M (4/99), instrucciones de servicio, instrucciones cortas o instrucciones de usuario Pelco C1901M (4/99). Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Pelco C1901M (4/99).

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Pelco C1901M (4/99), ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Pelco C1901M (4/99). Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Pelco C1901M (4/99).

El manual de instrucciones completo de Pelco debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Pelco C1901M (4/99) - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Pelco C1901M (4/99), preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Pelco C1901M (4/99) que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Pelco C1901M (4/99) - que deben facilitarnos los primeros pasos durante el uso de Pelco C1901M (4/99)
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Pelco C1901M (4/99)
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Pelco C1901M (4/99) en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Pelco C1901M (4/99)?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelco C1901M (4/99), haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelco C1901M (4/99) probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)