Manuale per l’uso Pelco C1901M (4/99)

12 pagine 0.18 mb
Scarica

Vai alla pagina of 12

Summary
  • Pelco C1901M (4/99) - page 1

    MC3800 Series 1/3-Inch Monochr ome Camera Installation/ Operation Manual C1901M (4/99) Pelco • 3500 Pelco Way • Clovis , CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ...

  • Pelco C1901M (4/99) - page 2

    2 Pelco Manual C1901M (4/99) IMPOR T ANT SAFEGUARDS AND W ARNINGS 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. T o pre v ent fire or shock hazard, do not e xpose the unit to rain or moisture . DESCRIPTION The MC3800 Series cameras are 1/3-inch format monochrome CCD (charge coupl ...

  • Pelco C1901M (4/99) - page 3

    Pelco Manual C1901M (4/99) 3 NOTE: References to illus- trations in this manual are keyed to the illustrations in the manual that is supplied with the camera. MC3800-2 MC3800-2X MC3800-3 10 11 10 11 13 12 3 4 5 6 7 8 9 2 1 LOCA TION AND FUNCTION OF P ARTS Refer to Illustration B for the location of the camera parts. B T op/Front/Side/Rear V iews of ...

  • Pelco C1901M (4/99) - page 4

    4 Pelco Manual C1901M (4/99) D Changing the Plug on an Auto Iris Lens Cable 2 3 4 1 1 2 3 4 Cover (supplied) Auto-iris lens cable Rib (If the cable is thick and the plug cover does not seat properly , cut away this rib.) Lens plug (supplied) 42 1 3 Pin # DC-servo Lens Pin 3: Drive (+) Pin 1: Control (-) Pin 2: Control (+) Pin 4: Drive (-) (Ground) ...

  • Pelco C1901M (4/99) - page 5

    Pelco Manual C1901M (4/99) 5 E C CS 2 1 4 3 Lens Installation A CCD-IRIS ON OFF CCD-Iris Function ...

  • Pelco C1901M (4/99) - page 6

    6 Pelco Manual C1901M (4/99) NOT A V AILABLE ON 3800 SERIES Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the number the more closed the iris is. IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small ...

  • Pelco C1901M (4/99) - page 7

    Pelco Manual C1901M (4/99) 7 Information Box Information Box LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUT O IRIS • Turn Manual Iris ring so iris is fully open and set the Focus ring for ∞ (or distant object). • Adjust Backfocus with CCD IRIS switch initially set to the OFF position. • Use the C/CS adjust- m ...

  • Pelco C1901M (4/99) - page 8

    8 Pelco Manual C1901M (4/99) Information Box Information Box The purpose of backfocusing is to make the adjustments necessary for the picture to remain in focus throughout the camera’s zoom range, which is the case for instance, in motorized zoom, auto iris configurations. Manual Iris lens/camera combinations also need to be backfocused. Follow t ...

  • Pelco C1901M (4/99) - page 9

    Pelco Manual C1901M (4/99) 9 G Connecting the Monitor to the MC3800 Series Cameras F Connecting the MC3800-2 12 3 1 2 CAMERA Install the camera where it will not be affected by fluorescent lights or window reflections. If the camera is used under illumination that is not steady , the picture may flicker . The MC3800-2 must be operated with a 24 V A ...

  • Pelco C1901M (4/99) - page 10

    10 Pelco Manual C1901M (4/99) I V ertical Phase V ertical phase adjustment is not vertical roll adjustment. Each camera is adjusted to the AC zero crossover point at the factory . Problems arise, however, especially in larger systems, when: 1. Switching rapidly between widely separated cameras with manual or sequential switchers. 2. Switching betwe ...

  • Pelco C1901M (4/99) - page 11

    Pelco Manual C1901M (4/99) 11 INCIDENT LIGHT LEVEL ADJUSTMENT Since the incident light level has been preset at the factory , usually no further adjustment is required. If the picture is too dark, however , or if the picture’s highlights are extremely overexposed, adjust the LEVEL adjustment screw . This adjustment can only be used for auto-iris ...

  • Pelco C1901M (4/99) - page 12

    12 Pelco Manual C1901M (4/99) REVISION HISTOR Y Manual # Date Comments C1901M 1 1/96 Original version. 4/99 Added MC3800-2X model. Revised manual to new format. ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. Power Consumption: MC3800-2: Approximately 4.5 W MC3800-2X: Approximately 4.5 ...

Fabbricante Pelco Categoria Carbon Monoxide Alarm

I documenti che otteniamo dal fabbricante del dispositivoPelco C1901M (4/99) possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Pelco
- manuali per l’uso C1901M (4/99)
- schede prodotto Pelco
- opuscoli
- o etichette energetiche Pelco C1901M (4/99)
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Pelco C1901M (4/99).

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Pelco C1901M (4/99), manuali di manutenzione, brevi manuali o manuali utente Pelco C1901M (4/99). A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Pelco C1901M (4/99).

Manuali per l’uso simili

Manuale completo del dispositivo Pelco C1901M (4/99), come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Pelco C1901M (4/99) dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Pelco C1901M (4/99).

Il manuale per l’uso completo Pelco, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Pelco C1901M (4/99) - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Pelco C1901M (4/99), FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Pelco C1901M (4/99) che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Pelco C1901M (4/99) - che ci dovrebbe aiutare nei primi passi durante l'uso Pelco C1901M (4/99)
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Pelco C1901M (4/99)
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Pelco C1901M (4/99) in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Pelco C1901M (4/99)?

Utilizza il modulo sottostante

Se non hai risolto il problema con Pelco C1901M (4/99) con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Pelco C1901M (4/99) è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)