English dropdown-ico

Manual Hobart D340

12 pages 1.29 mb
Download

Go to site of 12

Summary
  • Hobart D340 - page 1

    FORM 19104 Rev. A (8-98) D340 MIXER D340 MIXERS D340 W/BRAKE ML - 104484 D340 W/O BRAKE ML - 104483 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 ...

  • Hobart D340 - page 2

    – 2 – © HOBART CORPORATION, 1994 MODEL D340 MIXER ...

  • Hobart D340 - page 3

    – 3 – Installation, Operation, and Care of MODEL D340 MIXERS SA VE THESE INSTRUCTIONS GENERAL The D340 Mixer is a medium duty mixer which develops 1 1 / 2 horsepower and features a timer, thermal overload protection, and a #12 attachment hub as standard equipment. A variety of agitators are available for use on either the standard 40 quart bowl ...

  • Hobart D340 - page 4

    – 4 – WARNING : ELECTRICAL AND GROUNDING CONNECTION MUST COMPLY WITH THE APPLICABLE PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT. A hole for 3 ⁄ 4 " trade size conduit is loc ...

  • Hobart D340 - page 5

    – 5 – Start Button Stop Button Timer Gear Shift Lever PL-40142-1 OPERA TION WARNING : MOVING BEATER IN BOWL, KEEP HANDS, CLOTHING, AND UTENSILS OUT WHILE IN OPERATION, DO NOT USE WITHOUT INTERLOCKED GUARD. Every D340 mixer is equipped with either an Electro-Mechanical Timer Control (described at the bottom of this page) or a Programmable Timer ...

  • Hobart D340 - page 6

    – 6 – PROGRAMMABLE TIMER CONTROLLER (when equipped) At Idle, the timer display [ – – : – – ] shows that no time has been set (Fig. 4). Fig. 4 Timer Keys Programming Function (if the mixer is not mixing). P1 Contains up to four preset times. Displays each preset time sequentially. P2 Contains up to four additional preset times. Displays ...

  • Hobart D340 - page 7

    – 7 – PROGRAMMABLE TIMER CONTROLLER (when equipped) continued Using the Preset Keys, P1 or P2, to set the Mixing Time . . . Each preset key has four time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed. The chart below shows the default settings; the next page ...

  • Hobart D340 - page 8

    – 8 – PROGRAMMABLE TIMER CONTROLLER (when equipped) continued To Revise the Preset Mixing Times contained in P1 or P2 . . . Each preset key has four preset time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed. Beginning from the Idle display [ – – : – ? ...

  • Hobart D340 - page 9

    – 9 – CHANGING SPEEDS The GEAR SHIFT LEVER is used to change speeds. Always stop the mixer before changing speeds. To change speeds, push the STOP button, move the gear shift lever to the desired speed, and restart the mixer by pushing the START button. NOTE : If you do not stop the mixer to change speeds, it will automatically shut itself off ...

  • Hobart D340 - page 10

    – 10 – Bowl Guard (Fig. 5) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator. To rotate the Wire Cage Assembly to the rear . . . Push the Latch in to release the Centering Pin from the Centering Ramp. Note how the grooves on the nylon Retainers allow the Wire Cage to ride a ...

  • Hobart D340 - page 11

    – 11 – Attachments To install an attachment, loosen the attachment hub thumb screw and remove the plug. Insert the attachment into the attachment hub, making certain that the square shank of the attachment is in the square driver of the mixer. Secure the attachment by tightening the thumb screw. Move the gear shift lever to the desired speed. W ...

  • Hobart D340 - page 12

    – 12 – PL-40172-1 Bowl Lift Slideways Bowl Lift Slideways The slideways (Fig. 6) should be lubricated once each month. Remove the apron (secured by four thumb screws) from the front of the pedestal. Lightly coat both slideways with Lubriplate 630AA (supplied). Replace the apron and thumbscrews. Fig. 6 TROUBLESHOOTING SYMPTOMS POSSIBLE CAUSES Mi ...

Manufacturer Hobart Category Mixer

Documents that we receive from a manufacturer of a Hobart D340 can be divided into several groups. They are, among others:
- Hobart technical drawings
- D340 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart D340
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart D340.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart D340, service manual, brief instructions and user manuals Hobart D340. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart D340.

Similar manuals

A complete manual for the device Hobart D340, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart D340 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart D340.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart D340 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart D340, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart D340, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart D340 - which should help us in our first steps of using Hobart D340
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart D340
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart D340 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart D340?

Use the form below

If you did not solve your problem by using a manual Hobart D340, ask a question using the form below. If a user had a similar problem with Hobart D340 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)