Manual Hobart 2812PS

16 pages 1.56 mb
Download

Go to site of 16

Summary
  • Hobart 2812PS - page 1

    N S T R U C T I O N S I 2812PS SLICER MODEL 2812PS SLICER . . . with Portion Scale MODEL 2 8 1 2 P S ML-104960 Previous models covered by this manual: 2812PS ML-104624 ML-104825 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34455 (Feb. 2000) ...

  • Hobart 2812PS - page 2

    – 2 – T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CARRIAGE TRAY . . . ...

  • Hobart 2812PS - page 3

    – 3 – Installation, Operation, and Care of Model 2812PS Slicer with Portion Scale SA VE THESE INSTRUCTIONS GENERAL The Hobart Model 2812PS Slicer with Portion Scale displays the weight or slice count as the sliced product falls to the platter. Four preset values (P1 thru P4) can be programmed with weight or slice count and are readily accessed ...

  • Hobart 2812PS - page 4

    – 4 – INST ALLA TION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installing the slicer, test the electrical service to assure it agrees with the specifications on the machine da ...

  • Hobart 2812PS - page 5

    – 5 – OPERA TION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE. The T OP K NIFE C OVER must be in position and secured with the L ATCH K NOB (Fig. 2). The R ING G UARD is not removable. The D EFLECTOR , mounted below the slicer knife, can be removed for cleaning. The ...

  • Hobart 2812PS - page 6

    – 6 – 12 3 4 R n PRESETS The four Preset keys (1 – 4) recall the last-entered portion mode and value and display the preset indicator ( P1 , P2 , P3 , or P4 ). In WEIGHT mode, the slicer beeps when the preset weight is on the platter. In SLICE mode, the slicer beeps when the preset number of slices has counted down to 0 . The Memory key uses ...

  • Hobart 2812PS - page 7

    – 7 – POWER UP When the slicer is plugged in, the control checks its own circuitry, goes through a series of illuminated displays, and ends with the scale at zero in weight mode. SCALE PLATFORM AND PLATTER ASSEMBLY Proper assembly of the nylon scale platform and stainless steel scale platter is necessary before weighing. To remove the nylon sca ...

  • Hobart 2812PS - page 8

    – 8 – WEIGHT MODE The scale is ready to weigh if the zero indicator is displayed when the platter is empty. Tare is permitted. Once invoked, the Tare value is set for all WEIGHT mode operations: Manual mode, Presets (P1 – P4), and Memory (M). The Tare value can be changed or turned off at any time. If SLICE is displayed, you can revert back t ...

  • Hobart 2812PS - page 9

    – 9 – SLICING IN MANUAL MODE . . . without using the Presets (P1 – P4) or the Memory key In Weight Mode . . . Set the Tare, if needed. Set thickness. Slice product. The displayed weight will reflect the platter weight (less Tare, if NET was displayed). When the product is removed from the platter, the display will return to 0.00 lb (or a nega ...

  • Hobart 2812PS - page 10

    – 10 – USING THE PRESETS: P1, P2, P3, P4 Press any Preset key — the last-saved values will be called up. For example, let's press the [ 1 ] Preset key and assume that the factory settings have not been changed. In Weight Mode . . . The preset weight, 0.25 lb, displays for two seconds; then, the actual platter weight (0.00 lb) displays. T ...

  • Hobart 2812PS - page 11

    – 11 – USING THE MEMORY KEY: In Weight Mode . . . You can enter the preset weight by using the numeric keys (for example, 125). The lb indicator will blink and the preset weight, 1.25 lb, displays. [ If you make a mistake, press the Clear key, CE , and reenter the numeric value, or press the CE key twice to restore the previous values.] Press t ...

  • Hobart 2812PS - page 12

    – 12 – CLEANING This machine must be thoroughly cleaned and sanitized after each day’s operation or after being idle for an extended period of time. WARNING : THE SLICER KNIFE IS VERY SHARP. EXERCISE EXTREME CAUTION WHEN WORKING NEAR THE KNIFE. WARNING : UNPLUG MACHINE POWER CORD AND TURN THE INDEX KNOB FULLY CLOCKWISE BEFORE CLEANING THE SLI ...

  • Hobart 2812PS - page 13

    – 13 – Do not exceed chemical manufacturer's recommended concentrations for detergent or sanitizer. Do not exceed 200 parts per million concentration of available chlorine. For example, mixing 1 tablespoon of 5.25% sodium hypochlorite bleach with 1 gallon of water yields a solution containing 200 ppm of available chlorine. Solution with co ...

  • Hobart 2812PS - page 14

    – 14 – MAINTENANCE KNIFE SHARPENING The Hobart cast stainless steel knife will provide long service in normal food retail or commercial kitchen use. However, in high volume applications where it is a practice to sharpen the knife frequently or even daily, the knife will be expended in a shorter time. Sharpen only when necessary; prolonged or to ...

  • Hobart 2812PS - page 15

    – 15 – NOTES: ...

  • Hobart 2812PS - page 16

    – 16 – FORM 34455 (Feb. 2000) PRINTED IN U.S.A. NOTES: ...

Manufacturer Hobart Category Kitchen Utensil

Documents that we receive from a manufacturer of a Hobart 2812PS can be divided into several groups. They are, among others:
- Hobart technical drawings
- 2812PS manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart 2812PS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart 2812PS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart 2812PS, service manual, brief instructions and user manuals Hobart 2812PS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart 2812PS.

Similar manuals

A complete manual for the device Hobart 2812PS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart 2812PS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart 2812PS.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart 2812PS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart 2812PS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart 2812PS, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart 2812PS - which should help us in our first steps of using Hobart 2812PS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart 2812PS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart 2812PS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart 2812PS?

Use the form below

If you did not solve your problem by using a manual Hobart 2812PS, ask a question using the form below. If a user had a similar problem with Hobart 2812PS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)