Инструкция обслуживания AEG ARE I2

33 страниц 0.34 mb
Скачать

Перейти на страницу of 33

Summary
  • AEG ARE I2 - page 1

    Manual Compact Reader ARE I2 Installation Guide for Systems with a Serial Interface (RS 232) ...

  • AEG ARE I2 - page 2

    Manual Page 2 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Contents 1 INTRODUCTION 5 2 SYSTEM OVERVIEW 5 3 START-UP PROCEDURE 6 4 INSTALLATION 7 4.1 Mounting of the Housing 7 4.2 Grounding of the ...

  • AEG ARE I2 - page 3

    Manual Page 3 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.7 BD- Baudrate 19 6.8 TOR – Maximum Reading Time 20 6.9 VS- Show Parameter 20 6.10 VSAVE – Save Parameter 20 7 OPERATING MODES OF ...

  • AEG ARE I2 - page 4

    Manual Page 4 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de ...

  • AEG ARE I2 - page 5

    Manual Page 5 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 1 Intr oduction This document will describe the components of the Com pact Reader System ARE I2 / RS 232 and the procedure how to do the ...

  • AEG ARE I2 - page 6

    Manual Page 6 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de The connection of the cables (power supply and da ta transfer) is done inside of the connection cab (SAB Cab). Together with an sealing ...

  • AEG ARE I2 - page 7

    Manual Page 7 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4 Installation To get the specified reading performance it is necessary to do the installation carefully step by step as it is described ...

  • AEG ARE I2 - page 8

    Manual Page 8 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Inside of the SAB Cap there are the pins of following connections: • power supply • data link to the serial interface RS232 The code ...

  • AEG ARE I2 - page 9

    Manual Page 9 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 3 4 5 1 6 Cable 7 4.3.3 Mounting of the Power Supply Cable The power supply cable must be mounted in following steps: • Remove all inn ...

  • AEG ARE I2 - page 10

    Manual Page 10 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.4 Assembling of the Power Supply and Data Cable (Single Cable Pipe) The connection of the cable is also done inside of the SAB Cab. ...

  • AEG ARE I2 - page 11

    Manual Page 11 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.5 Final Assembly of the Cable Pipe • Pull by and by all the cable back, until the isolation of the cables are near to beginning o ...

  • AEG ARE I2 - page 12

    Manual Page 12 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.7 Using the Service Cable ID 70213 Using the Service Cable, no special assembly work inside of the SAB Cab has be done by the custo ...

  • AEG ARE I2 - page 13

    Manual Page 13 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.8 Using the Power Supply and Data Cable ID 70212 Using the Power Supply and Data Cable, no special assembly work inside of the SAB ...

  • AEG ARE I2 - page 14

    Manual Page 14 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de BFH ID Moderne elektronische Objekterkennung und Verfolgung L 1 L2 L4 L3 L5 ARE I2 5 V isual Signal Lamps To show the operational state ...

  • AEG ARE I2 - page 15

    Manual Page 15 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6 Settings of the Reader / Most Important Parameters The default value of the opera ting mode parameter is 2.. • MD 2 triggered by an ...

  • AEG ARE I2 - page 16

    Manual Page 16 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de After entering a valid command together with a param eter value, the system answers by sending the parameter value and <CR>. Exam ...

  • AEG ARE I2 - page 17

    Manual Page 17 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Input format: CID <SP> parameter <CR> Parameter: Value Function 0 no filter function , (default value) 1 suppression of rep ...

  • AEG ARE I2 - page 18

    Manual Page 18 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 0 one out of one (no effect) 1 two out of two ; (default value) Output (example): 1 <CR> Sequence of readings Length of the readi ...

  • AEG ARE I2 - page 19

    Manual Page 19 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.6 EC- Echo The command EC changes of the echo function setting. Input format: EC <SP> parameter <CR> Parameter: v Functio ...

  • AEG ARE I2 - page 20

    Manual Page 20 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.8 T OR – Maximum Reading T ime Timeout for the reader. TOR is used in operation mode 2 as maxim um gating time for a reading proces ...

  • AEG ARE I2 - page 21

    Manual Page 21 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7 Operating Modes of the Reader There are two operational modes defined: • Mode 2 The reading process is triggered by an software com ...

  • AEG ARE I2 - page 22

    Manual Page 22 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Figure 7.1.2 : Software triggered r eading operation with TOR>0 Please note : The TOR parameter is only active, if the GT-Command is ...

  • AEG ARE I2 - page 23

    Manual Page 23 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.1.2 Basic Data Exchange Process The master has to send an software comm and to start an read or write process of the reader. After do ...

  • AEG ARE I2 - page 24

    Manual Page 24 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.1.4.2 Selective Read RD • Start the reader with the command RD plus Param eters ( plus <CR>). see example below. - You can re ...

  • AEG ARE I2 - page 25

    Manual Page 25 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de • Wait for the answer • Analyse the received answer: 3 characters plus <CR>. < ACK > < CR > Writing process was s ...

  • AEG ARE I2 - page 26

    Manual Page 26 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.2 Operating Mode 0 - Continuous Reading When operating continuously the exciter is switched on permanently. The reading cycles are in ...

  • AEG ARE I2 - page 27

    Manual Page 27 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de • NID 1 failure protection.; selecti on guide 2 out 2 transponder codes The result of the reading process may also seen at the LED’ ...

  • AEG ARE I2 - page 28

    Manual Page 28 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 8 Instructions 8.1 General Instructions To avoid any reduction of the reading distance of the reader, the housing must not be brought n ...

  • AEG ARE I2 - page 29

    Manual Page 29 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 8.2 Special Instructions for Using a Read / Write System To transfer the data to the transponder or to control the selective read proce ...

  • AEG ARE I2 - page 30

    Manual Page 30 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 9 Hotline If there are questions or suggestions please be so free an phone: Fax: ++49 (0)731-933-1855 e-mail: info@aegid.de http: www. ...

  • AEG ARE I2 - page 31

    Manual Page 31 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12 Appendix 12.1 Best Orientation for an F-Type -Reader Compact Reader ARE I2 Internal Antenna F-Typ 1 1 0 2 0 3 0 8 0 1 0 2 0 3 0 5 1 ...

  • AEG ARE I2 - page 32

    Manual Page 32 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12.2 Best Orientation for an L-Type -Reader Compact Reader ARE I2 Internal Antenna L-Typ Bauteilname 1 1 0 2 0 3 0 8 0 1 0 2 0 3 0 5 1 ...

  • AEG ARE I2 - page 33

    Manual Page 33 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12.3 Assembling of the SAB Cab ...

Производитель AEG Категория Computer Hardware

Документы, которые мы получаем от производителя устройства AEG ARE I2 мы можем разделить на несколько групп. Это в частности:
- технические чертежи AEG
- инструкции обслуживания ARE I2
- паспорта изделия AEG
- информационные брошюры
- энергетические этикетки AEG ARE I2
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания AEG ARE I2.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа AEG ARE I2, инструкции обслуживания, короткие инструкции или инструкции пользователя AEG ARE I2. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия AEG ARE I2.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства AEG ARE I2, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании AEG ARE I2 пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей AEG ARE I2.

Полная инструкция обслуживания AEG, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией AEG ARE I2 - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания AEG ARE I2, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся AEG ARE I2, которое найдем в данном документе
3. Советы по использованию основных функций устройства AEG ARE I2 - которые должны облегчить нам первые шаги во время использования AEG ARE I2
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем AEG ARE I2
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра AEG ARE I2 в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся AEG ARE I2?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с AEG ARE I2, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с AEG ARE I2 со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)